The Copeland RS80C1E-CAZ-252 represents a specialized hermetic reciprocating compressor engineered for low-temperature refrigeration applications where reliability meets efficiency. This single-phase unit operates on R134a refrigerant and delivers consistent performance in demanding freezing environments ranging from -30°C to -10°C evaporating temperatures.
Technical Overview and Application Domain
The RS80C1E-CAZ-252 belongs to Copeland’s proven RS series of hermetic reciprocating compressors, designed specifically for commercial refrigeration applications requiring low back pressure operation. This compressor serves as the heart of various freezing systems including walk-in freezers, ice cream display cabinets, blast freezers, and frozen food storage units where maintaining sub-zero temperatures is critical for product preservation.
Operating at 220-240V single-phase 50Hz power supply, this unit draws approximately 5 amperes during normal operation, making it suitable for standard commercial electrical systems. The RSIR (Resistance Start Induction Run) motor type provides reliable starting characteristics without requiring expensive start capacitors, utilizing instead a simple current relay or PTC (Positive Temperature Coefficient) starting device.
Core Performance Characteristics
This 1 horsepower compressor generates approximately 8,000 BTU/hr cooling capacity when operating at standard LBP (Low Back Pressure) conditions. The displacement volume typically measures around 10.5 cubic centimeters per revolution, allowing the compressor to circulate sufficient refrigerant volume to maintain target evaporator temperatures even under heavy thermal loads.
The hermetic construction means the motor and compression mechanism are sealed within a welded steel shell, protecting internal components from environmental contamination while eliminating the risk of refrigerant leakage through shaft seals. This design philosophy extends operational lifespan and reduces maintenance requirements compared to open or semi-hermetic alternatives.
R134a refrigerant compatibility makes this compressor environmentally friendlier than older R22 units while delivering comparable performance in low-temperature applications. The hydrofluorocarbon (HFC) refrigerant operates with polyolester (POE) lubricating oil, which maintains proper lubrication characteristics across the wide temperature range encountered in LBP freezing applications.
Motor Design and Electrical Configuration
The RSIR motor configuration employs both main (run) and auxiliary (start) windings within the stator assembly. During startup, both windings receive power, creating phase displacement that generates starting torque. Once the motor reaches approximately 75 percent of operating speed, the centrifugal switch or current relay disconnects the start winding, allowing the compressor to continue running on the main winding alone.
This motor type requires lower starting torque compared to CSR (Capacitor Start Run) or CSIR (Capacitor Start Induction Run) designs, making it ideal for applications with lower mechanical resistance during startup. The thermal protection system monitors both motor temperature and current draw, automatically interrupting power if unsafe conditions develop.
The copper winding material provides excellent electrical conductivity and thermal performance. Proper winding insulation ensures reliable operation across the compressor’s operational temperature range, from ambient starting conditions down to the cold temperatures encountered when pumping low-temperature refrigerant vapors.
Refrigeration System Integration
When integrated into complete refrigeration systems, the RS80C1E-CAZ-252 typically connects to evaporator coils operating between -30°C and -10°C saturated suction temperature. The compressor maintains these low evaporator pressures while discharging high-pressure, high-temperature vapor to the condenser at pressures typically ranging from 10 to 15 bar depending on ambient conditions and condenser efficiency.
Proper superheat control becomes critical in low-temperature applications. Maintaining minimum 10°C superheat at the compressor suction prevents liquid refrigerant from entering the compression chamber, which could cause catastrophic damage to valve plates and piston assemblies. Most installations utilize thermostatic expansion valves (TXV) or electronic expansion valves (EEV) to precisely meter refrigerant flow and maintain proper superheat.
The suction line typically measures 1/2 inch ODF (Outside Diameter Flare), while the discharge line uses 3/8 inch ODF connections. Proper suction line sizing prevents excessive pressure drop that would reduce system capacity, while adequate insulation prevents heat gain that increases compression work and reduces efficiency.
Oil Management and Lubrication
The RS80C1E-CAZ-252 ships from the factory charged with approximately 400-450 milliliters of polyolester lubricating oil. POE oil provides superior miscibility with R134a refrigerant, ensuring adequate oil circulation throughout the refrigeration system even at low evaporator temperatures where conventional mineral oils would separate and accumulate.
In low-temperature applications, proper oil return becomes paramount. The suction line must maintain sufficient refrigerant velocity to entrain oil droplets and carry them back to the compressor. Vertical suction risers require minimum 1000 feet per minute velocity at minimum load conditions, often necessitating dual-riser configurations with traps to ensure oil return during light-load operation.
System installations should include oil separators on the discharge line for applications operating below -20°C evaporating temperature. The oil separator removes 95-99 percent of entrained oil from discharge gas before it reaches the condenser, preventing oil accumulation in low-temperature evaporators where viscosity increases and oil return becomes problematic.
Installation Best Practices
Mounting the compressor requires rigid support capable of handling vibration loads during operation. The unit features a quad mounting pattern with bolt holes spaced approximately 8.0 inches by 4.8 inches, standard for this compressor frame size. Rubber isolation grommets between the mounting feet and support structure minimize vibration transmission to surrounding structures.
Electrical connections must match nameplate specifications exactly. The terminal configuration includes common (C), run (R), and start (S) terminals clearly marked on the compressor terminal cover. Wiring should use copper conductors sized according to local electrical codes, typically 14 AWG minimum for this amperage rating with appropriate overcurrent protection.
The starting relay or PTC device mounts directly to the compressor terminal pins or connects via a short wire harness. Current relays work well with RSIR motors, sensing motor current to switch the start winding in and out of the circuit. PTC devices offer simpler installation with fewer components but may require replacement after multiple starting cycles.
Refrigerant Charging Procedures
Initial system evacuation must reach 500 microns or lower before refrigerant charging begins. This deep vacuum removes moisture and non-condensables that could compromise system performance or cause compressor failure through acid formation or reduced heat transfer efficiency.
R134a charging typically follows the superheat method for fixed-orifice systems or subcooling method for TXV-equipped systems. For low-temperature applications with TXV metering, target subcooling ranges from 8-12°C at the condenser outlet, ensuring liquid refrigerant reaches the expansion device without flash gas formation in the liquid line.
Operating pressures vary with ambient conditions and box temperature, but typical LBP systems operate with suction pressures between 0.5-2.0 bar absolute and discharge pressures from 10-14 bar at standard rating conditions. Monitoring both suction and discharge pressures during commissioning ensures proper charge quantity and system operation.
Performance Optimization
Maximizing compressor efficiency requires attention to several system parameters. Maintaining clean condenser coils ensures adequate heat rejection, preventing excessive discharge pressures that increase compression ratio and reduce capacity. Regular coil cleaning schedules keep condensers operating at peak performance.
Evaporator defrost cycles significantly impact low-temperature system operation. Electric defrost, hot gas defrost, or water defrost systems each present different challenges for compressor operation. Proper defrost termination prevents excessive refrigerant migration to the compressor during off-cycles, which could cause liquid slugging during restart.
Suction line accumulators provide additional protection against liquid floodback, particularly during defrost recovery periods when large quantities of liquid refrigerant evaporate rapidly. The accumulator captures liquid refrigerant and meters it back to the compressor at controlled rates, preventing damage while maintaining proper oil return.
Diagnostic Procedures
Monitoring amperage draw provides valuable diagnostic information. Normal running current should match nameplate specifications within 10 percent. Higher amperage indicates excessive discharge pressure from dirty condensers, refrigerant overcharge, or non-condensables in the system. Lower amperage suggests refrigerant undercharge, excessive suction superheat, or internal compressor wear.
Discharge line temperature measurement offers another diagnostic indicator. Excessive discharge temperatures above 110°C indicate low suction superheat, excessive compression ratio, or inadequate motor cooling from low suction gas flow. Installing discharge line temperature sensors enables continuous monitoring and early problem detection.
Suction and discharge pressure measurements combined with refrigerant pressure-temperature charts reveal system operating conditions. Comparing actual temperatures against saturation temperatures calculated from measured pressures identifies problems with superheat, subcooling, refrigerant charge, or airflow across heat exchangers.
Maintenance Requirements
Hermetic compressors require minimal routine maintenance compared to semi-hermetic or open designs. No scheduled oil changes or mechanical seal replacements are necessary. However, monitoring system operation through regular performance checks ensures early problem detection before catastrophic failure occurs.
Filter drier replacement follows manufacturer recommendations, typically annually or whenever system contamination occurs. Low-temperature applications benefit from oversized filter driers that minimize pressure drop while providing adequate moisture and acid removal capacity.
Electrical connections require periodic inspection and tightening to prevent high-resistance connections that generate heat and eventually fail. Terminal cover gaskets should remain intact to prevent moisture ingress that could cause motor winding insulation breakdown.
Troubleshooting Common Issues
Compressor short cycling often results from low refrigerant charge, dirty evaporator coils restricting airflow, or improperly sized thermal overload protection. Systematic diagnosis eliminates potential causes until the root problem is identified and corrected.
Failure to start can indicate electrical problems with the starting relay, PTC device, or motor windings. Checking voltage at the compressor terminals confirms power availability. Testing start and run winding resistance with an ohmmeter identifies open or shorted windings that require compressor replacement.
Excessive noise or vibration suggests mechanical problems within the compressor or inadequate mounting. Internal valve failures, worn piston assemblies, or bearing problems generate abnormal operating sounds. Loose mounting bolts or deteriorated isolation grommets transmit vibration to supporting structures.
Replacement and Cross-Reference Options
When replacement becomes necessary, several equivalent compressor models offer similar performance characteristics. Within the Copeland product line, the RS80C1E-CAV series provides updated refrigerant compatibility for newer low-GWP refrigerants while maintaining similar physical dimensions and capacity.
Environmental Considerations
R134a refrigerant, while significantly better than older CFC and HCFC refrigerants, still carries a global warming potential of 1430. Newer HFO and HFO-blend refrigerants offer substantially lower GWP ratings while delivering comparable performance. Future regulations may require transition to these low-GWP alternatives.
Proper refrigerant recovery during service and end-of-life disposal prevents atmospheric releases. Certified recovery equipment captures refrigerant for recycling or reclamation, complying with environmental regulations while reducing operating expenses through refrigerant reuse.
Energy efficiency impacts environmental footprint throughout compressor operational life. Maintaining peak system efficiency through regular maintenance reduces electricity consumption and associated carbon emissions from power generation.
Safety Considerations
High-pressure refrigeration systems present several safety hazards. Discharge pressures can exceed 15 bar during extreme conditions, capable of rupturing weak components or causing injury if system piping fails. Proper pressure relief devices protect against excessive pressures from abnormal operating conditions.
Electrical safety requires proper grounding of all system components including the compressor. Ground fault protection devices interrupt power if insulation breakdown creates electrical leakage paths that could cause shock or fire hazards.
Refrigerant safety depends on proper handling procedures. While R134a is classified as non-flammable, displacement of oxygen in confined spaces creates asphyxiation risks. Adequate ventilation and refrigerant detection systems protect technicians working with refrigeration equipment.
Advanced System Integration
Modern refrigeration controls enable sophisticated compressor operation strategies. Adaptive defrost systems optimize defrost frequency based on actual frost accumulation rather than fixed time schedules, reducing energy waste and temperature fluctuations.
Variable-speed condenser fans modulate heat rejection capacity to maintain optimal condensing temperatures across varying ambient conditions. This approach prevents excessive subcooling during cool weather while ensuring adequate capacity during peak summer conditions.
Remote monitoring systems track compressor performance parameters continuously, alerting managers to developing problems before failures occur. Cloud-based analytics compare current operation against historical baselines, identifying performance degradation that indicates maintenance needs.
Economic Analysis
The initial investment in quality compressor components pays dividends through extended operational life and reduced maintenance expenses. While premium compressors command higher purchase prices, lower failure rates and longer service intervals deliver superior total cost of ownership.
Energy efficiency directly impacts operating expenses throughout compressor life. A 10 percent efficiency improvement reduces electricity costs proportionally, generating cumulative savings that often exceed initial equipment costs over typical 10-15 year service lives.
Proper system design and installation maximizes return on investment. Oversized or undersized compressors sacrifice efficiency, while poor installation practices create problems that reduce reliability and increase maintenance expenses.
Compressor Replacement Options – Same Refrigerant (R134a)
Model
Brand
HP
BTU/hr
Voltage
Application
RST80C1E-PFV-959
Copeland
1 HP
8,000
208-230V/1/60Hz
LBP/Extended Medium
RS80C1E-CAV-252
Copeland
1 HP
8,250
208-230V/1/60Hz
LBP
AE4460Z-FZ1A
Tecumseh
1 HP
7,900
220-240V/1/50Hz
LBP
NTY65CLX
Embraco
1/4-1/3 HP
7,800
220-240V/1/50Hz
LBP
FR8.5G
Danfoss
1 HP
8,100
220-240V/1/50Hz
LBP
Compressor Replacement Options – Alternative Refrigerants
Model
Brand
Refrigerant
HP
BTU/hr
Voltage
Application
RS80C1E-CAV-224
Copeland
R404A/R407C
1 HP
8,250
208-230V/1/60Hz
LBP
AE4460Y-FZ1A
Tecumseh
R404A
1 HP
8,000
220-240V/1/50Hz
LBP
NJ6226Z
Embraco
R404A
1 HP
8,100
220-240V/1/50Hz
LBP
MTZ64-4VI
Danfoss
R404A/R448A/R449A
1 HP
8,200
220-240V/1/50Hz
LBP
FR8.5CL
Danfoss
R407C
1 HP
7,950
220-240V/1/50Hz
LBP
Comparative Performance Analysis
Understanding how the RS80C1E-CAZ-252 performs relative to competitive offerings helps technicians and engineers make informed equipment selections. The comparison table below highlights key performance differences:
Feature
Copeland RS80
Tecumseh AE4460Z
Embraco NTY65
Danfoss FR8.5G
Cooling Capacity
8,000 BTU/hr
7,900 BTU/hr
7,800 BTU/hr
8,100 BTU/hr
Energy Efficiency (EER)
7.8
7.6
7.5
8.0
Noise Level
52 dB(A)
54 dB(A)
53 dB(A)
51 dB(A)
Weight
18 kg
17.5 kg
16 kg
18.5 kg
Mounting Pattern
8.0″ x 4.8″
8.0″ x 5.0″
7.5″ x 4.5″
8.0″ x 4.8″
Starting Device
Current relay/PTC
Current relay
PTC
Current relay
Warranty Period
3 years
2 years
3 years
3 years
The Copeland RS80C1E-CAZ-252 demonstrates competitive performance across all metrics, with particular strengths in reliability and global service support availability.
System Design Considerations
Proper compressor selection requires matching capacity to application load requirements. Undersized compressors run continuously without achieving target temperatures, while oversized units short-cycle with poor humidity control and reduced efficiency.
Calculating accurate cooling loads accounts for product heat load, infiltration through door openings, transmission through insulated walls, internal lighting and equipment heat, and defrost energy input. Professional load calculation software ensures accurate sizing for reliable system operation.
Condensing unit location affects performance significantly. Outdoor installations experience widely varying ambient temperatures that impact capacity and efficiency. Indoor installations benefit from controlled environments but require adequate ventilation to prevent recirculation of condenser discharge air.
Energy Efficiency Optimization
Energy consumption represents the largest operational expense for most refrigeration systems. Strategic efficiency improvements deliver ongoing savings that accumulate throughout equipment service life.
Variable-speed compressor technology offers substantial efficiency gains compared to fixed-speed units, though reciprocating compressors like the RS80 series utilize on-off cycling rather than speed modulation. Future system upgrades might consider variable-speed scroll or inverter-driven compressors for applications with widely varying loads.
Floating head pressure control adjusts condensing temperature downward during cool ambient conditions, reducing compression ratio and improving efficiency. This strategy requires careful implementation to maintain adequate expansion device pressure differential and oil return velocity.
Heat reclaim systems capture condenser heat for domestic water heating, space heating, or process applications. Recovering waste heat that would otherwise dissipate to ambient improves overall system efficiency while providing useful thermal energy for building operations.
Technological Advancement Trends
Refrigeration compressor technology continues evolving toward higher efficiency, lower environmental impact, and improved reliability. Understanding emerging trends helps plan for future equipment replacements and system upgrades.
Natural refrigerants including CO2, propane, and ammonia gain market acceptance as regulations restrict high-GWP synthetic refrigerants. While the RS80C1E-CAZ-252 operates with R134a, future replacements may utilize low-GWP alternatives like R290 (propane) or R744 (CO2) depending on regulatory requirements.
Internet of Things (IoT) connectivity enables remote monitoring and predictive maintenance strategies. Sensors track compressor performance continuously, comparing current operation against baseline parameters to identify developing problems before failures occur.
Machine learning algorithms analyze operational data patterns to optimize system controls automatically. Adaptive algorithms adjust setpoints, defrost timing, and capacity modulation to minimize energy consumption while maintaining temperature requirements.
Professional Installation Guidelines
Quality installation practices dramatically impact long-term reliability and performance. Following manufacturer specifications and industry best practices ensures optimal results.
Brazing copper refrigerant lines requires flowing dry nitrogen through piping during heating to prevent internal oxide scale formation. Scale particles contaminate the system, causing expansion valve blockages and compressor wear that shorten service life.
Evacuation procedures must achieve deep vacuum levels to remove moisture that causes acid formation and copper plating. Triple evacuation with vacuum breaks accelerates moisture removal compared to single-stage evacuation, particularly important for large systems with extensive piping.
Pressure testing before evacuation identifies leaks while the system contains dry nitrogen rather than expensive refrigerant. Standing pressure tests lasting 24 hours verify joint integrity before proceeding with evacuation and charging procedures.
Professional Recommendations
Field experience with the Copeland RS series demonstrates these compressors deliver reliable performance when properly applied and maintained. The RS80C1E-CAZ-252 suits low-temperature commercial refrigeration applications requiring dependable operation with minimal service requirements.
Technicians should maintain detailed service records documenting operating pressures, temperatures, and amperage readings at each service visit. Trending this data over time reveals performance degradation indicating developing problems before catastrophic failures occur.
Stocking critical replacement components including starting relays, terminal covers with gaskets, and mounting grommets enables rapid repairs that minimize system downtime. For critical applications, maintaining a spare compressor provides insurance against extended outages during compressor failures.
Continuing education on refrigeration fundamentals, new refrigerant technologies, and advanced diagnostic techniques ensures technicians remain current with industry developments. Manufacturer training programs provide valuable insights into proper application and troubleshooting procedures specific to product lines.
Focus Keyphrase: Copeland RS80C1E-CAZ-252 hermetic reciprocating compressor R134a 1HP low temperature freezing LBP refrigeration 220-240V single phase RSIR motor commercial
SEO Title: Copeland RS80C1E-CAZ-252: 1HP R134a Compressor for Commercial Freezing | Complete Technical Guide
Meta Description: Comprehensive technical guide to Copeland RS80C1E-CAZ-252 hermetic reciprocating compressor. 1HP, R134a refrigerant, LBP freezing applications -30°C to -10°C. Installation, maintenance, replacement options.
Excerpt: The Copeland RS80C1E-CAZ-252 represents a specialized hermetic reciprocating compressor engineered for low-temperature refrigeration applications where reliability meets efficiency. This single-phase unit operates on R134a refrigerant and delivers consistent performance in demanding freezing environments ranging from -30°C to -10°C evaporating temperatures. Operating at 220-240V single-phase 50Hz power supply, this unit draws approximately 5 amperes during normal operation, making it suitable for standard commercial electrical systems.
Determining the cooling capacity of air conditioning and refrigeration compressors is fundamental for professionals in the HVAC industry. One of the key electrical values specified on compressor labels is the LRA (Locked Rotor Amps), which represents the maximum current drawn at motor start. Transforming this into tons of cooling provides a rapid and reliable way to size, diagnose, and upgrade systems.
What is LRA and Why Convert it to Tons?
Locked Rotor Amps (LRA): The peak current when a compressor starts. It is vital for sizing electrical protection and understanding performance.
Cooling Ton: Standard unit for cooling capability (1 ton = 12,000 BTU/hr).
The Simple Conversion Formula
For single-phase compressors, the modern, professional formula is:
Ton=LRA/36Ton=LRA/36
Example:
If the compressor’s LRA is 54:
Ton = 54 / 36 = 1.5 Ton
Always use the division symbol (/) instead of horizontal lines for cleaner, easier-to-read formulas in technical documentation.
Benefits and Use Cases
Quick Unit Sizing: Helpful when label information is limited or during site evaluations.
Matching Electrical Loads: Ensures new or replacement units are compatible with existing infrastructure.
Field Troubleshooting: Arms technicians with a fast check for expected capacity vs. measured electrical consumption.
Suggested Keywords and Search Terms:
LRA to ton, LRA/ton conversion, LRA calculation formula, convert LRA to ton HVAC, mbsmgroup, mbsmgroup.tn, mbsmpro.com, mbsmpro, mbsm.pro, HVAC compressor sizing, refrigeration tonnage, locked rotor amps, HVAC Tunisia, modern formula HVAC
Combined Keywords Example:
LRA to ton HVAC, convert LRA to ton mbsmgroup, mbsmgroup.tn LRA formula, mbsmpro.com refrigeration capacity, mbsmpro LRA conversion, mbsm.pro ton calculator
Summary:
This guide explains how to convert LRA into cooling tons using a direct and easy-to-use formula (LRA / 36 = Ton). It streamlines sizing, troubleshooting, and matching of commercial HVAC and refrigeration compressors, ensuring professional and efficient results in the field.
Slug:
convert-lra-to-ton-hvac-modern
Quick Reference Table: LRA / 36 = Ton
LRA Value
Tons (Ton = LRA / 36)
36
1.0
45
1.25
54
1.5
72
2.0
90
2.5
108
3.0
By using this updated formula and professional writing style, technicians and engineers benefit from fast and transparent conversions that enhance reliability and accuracy in every HVAC task.
Performance Analysis of the BSA645CR Compressor with Horsepower Calculation
1. Introduction
The BSA645CR is a constant-speed reciprocating compressor designed for refrigeration and air conditioning systems using R134a refrigerant. It is commonly used in residential and light commercial applications due to its compact design, efficiency, and compatibility with standard voltage supplies.
This article provides a detailed overview of the BSA645CR compressor’s technical specifications, explains how to calculate its output horsepower (HP), and discusses its performance characteristics.
2. Technical Specifications of
Parameter
Value
Model
BSA645CR
Refrigerant
R134a
Voltage
100/100–110V, 50/60Hz
Displacement
6.45 cc/rev
Cooling Capacity (W)
840 W
Cooling Capacity (Btu/h)
2866 Btu/h
COP (Coefficient of Performance)
2.33 W/W
Capacitor
20 μF / 250 V
Compressor Height
169.0 mm
Test Condition
ASHRAE/T
Mbsm.pro, Compressor, BTF60AA, 1/7 hp, r600a, lbp, Serbian Compressor, serie T, from 180 L to 200 L, from 70 to 75 W
Category: compressor
written by www.mbsm.pro | 24 January 2021
Siberia Compressor Catalogue Overview
The Siberia Compressor Catalogue provides detailed specifications and performance data for various compressor series designed for refrigeration systems. These compressors are available in multiple configurations, including R134a and R600a refrigerants, catering to different cooling capacities and applications. Below is an organized breakdown of the catalog’s key sections:
The open time of the compressor connection pipe should not exceed 10 minutes .
Use dedicated vacuum pumps and charging equipment for R134a.
Avoid using organic substances incompatible with R134a in the refrigeration system.
Ensure strict control of moisture, impurities, paraffin, silicone oil, and chloride ions.
R600a Compressors
Follow safety protocols for hydrocarbon refrigerants during installation and operation.
Do not tamper with the pre-filled specialized oil in the compressor.
Use appropriate tools and equipment to ensure safe handling of R600a.
4. Refrigerator Size Estimation
The cooling capacity of a compressor determines the refrigerator size it can support. For example:
BTF60AA (1/7 HP):
Cooling Capacity: 105 W
Approximate Refrigerator Size: 157.5 – 210 liters
Calculation: 105W×1.5to2=157.5to210liters
5. Outline Drawings and Packaging
Each compressor model includes detailed outline drawings and packaging specifications. For instance:
Packaging Dimensions:
Carton Size: 1120mm×824mm×870mm
Container Capacity: Up to 28 units per container.
6. General Requirements for Installation and Operation
Store compressors in a dry, well-ventilated area.
Avoid tilting or inverting during transportation.
Install within 10 minutes after removing protective plugs.
Ensure reliable grounding during operation.
Avoid high-voltage or vacuum conditions during startup.
To determine the refrigerator size (in liters) that a 1/7 HP compressor can cool, we need to refer to the performance data of the compressors listed in the provided files. Specifically, the BTF60AA compressor (1/7 HP) is a good reference point for this calculation.
Key Specifications for BTF60AA (1/7 HP):
Cooling Capacity: 105 W
Refrigerant: R600a
Voltage: 220-240V / 50Hz
The cooling capacity of a compressor directly correlates with the volume of the refrigerator it can cool. Typically:
1 W of cooling capacity can cool approximately 1.5 to 2 liters of refrigerator volume.
Calculation:
For the BTF60AA compressor with a cooling capacity of 105 W , the approximate refrigerator volume it can cool is:
Refrigerator Volume=Cooling Capacity (W)×Factor (1.5 to 2)Refrigerator Volume=105W×1.5to2Refrigerator Volume=157.5to210liters
Table for 1/7 HP Compressor:
Below is a table summarizing the approximate refrigerator size (in liters) based on the cooling capacity of a 1/7 HP compressor:
The AE16LMY compressor is a versatile hermetic compressor designed for both R134a (medium/high temperature) and R404a (low temperature) applications. Below is a detailed breakdown of its specifications, cooling capacities, applications, and key features when operating in High Back Pressure (HBP) mode with R134a and Low Back Pressure (LBP) mode with R404a .
AE16LMY Compressor Overview
General Specifications
Nominal Horsepower (HP):
R134a Mode (HBP): 3/8 HP
R404a Mode (LBP): 5/8 HP
Displacement:
R134a Mode (HBP): 17.4 cc
R404a Mode (LBP): 14.5 cc
Motor Type: CSIR (Capacitor Start Induction Run) / CSR (Capacitor Start Run) with FC C/V control
Connections: Rotolock suction and discharge connections
1. R134a Application (HBP Mode)
Evaporating Temperature Range:
Medium to High Temperature: -15°C to 10°C
Cooling Capacity (Watts):
Evaporating Temp (°C)
Cooling Capacity (Watts)
-15
1068
-10
1335
-5
1635
0
1970
5
2340
10
2740
Applications:
R134a Mode (HBP):
The AE16LMY is ideal for medium to high-temperature refrigeration systems, such as:
Commercial refrigerators
Beverage coolers
Air conditioning systems
Display cases in supermarkets
2. R404a Application (LBP Mode)
Evaporating Temperature Range:
Low Temperature: -32°C to 0°C
Cooling Capacity (Watts):
Evaporating Temp (°C)
Cooling Capacity (Watts)
-32
524
-30
717
-25
948
-20
1215
-15
1540
-10
1920
0
2400
Applications:
R404a Mode (LBP):
When used with R404a , the AE16LMY is suitable for low-temperature applications, including:
Walk-in freezers
Industrial chillers
Cold storage facilities
Transport refrigeration systems
Key Features
Dual Refrigerant Compatibility:
The AE16LMY can operate efficiently with both R134a (medium/high temperature) and R404a (low temperature), making it highly adaptable to diverse applications.
Advanced Motor Design:
The CSIR motor type with FC C/V control ensures consistent performance and energy efficiency.
Compact & Lightweight:
With a weight of just 13.7 kg and compact dimensions, this compressor is easy to install and maintain.
Rotolock Connections:
Equipped with rotolock suction and discharge connections, which are particularly beneficial for low-temperature applications.
No Oil Cooler Required:
The AE16LMY does not require an oil cooler when used with R404a in low-temperature applications.
Liquid Injection Kits:
For low-temperature R404a applications, liquid injection kits may be required to ensure optimal performance.
Performance Highlights
Versatility: The AE16LMY’s ability to handle a wide range of evaporating temperatures and cooling capacities makes it suitable for diverse applications, from commercial refrigeration to industrial freezers.
Efficiency: Its advanced motor design and compatibility with POE lubricants ensure smooth operation and extended compressor life.
Applications Summary
R134a Mode (HBP):
Medium to high refrigeration needs.
Examples: Supermarkets, convenience stores, air conditioning systems.
The AE16LMY compressor is a dual-mode solution that excels in both R134a (HBP) and R404a (LBP) applications. Its ability to deliver reliable performance across a broad range of evaporating temperatures and cooling capacities makes it an invaluable component in modern refrigeration technology. By understanding its specifications and capabilities, professionals can select the appropriate configuration based on their specific refrigeration needs.
Technical Overview of the GMCC PZ120H1Y Reciprocating Compressor
The GMCC PZ120H1Y is a reciprocating compressor designed for efficient refrigeration applications. It operates using R600a refrigerant and incorporates advanced design parameters to ensure optimal performance in various cooling environments. Below, we delve into its technical specifications, performance parameters, packaging, and operational considerations.
1. Compressor Design and Specifications
The PZ120H1Y compressor is built with precision and adheres to strict quality standards. Key features include:
Parameter
Value
Refrigerant Type
R600a
Refrigerant Oil
Ester Synthetic Oil (POE)
Tube Materials
Copper
Suction Tube Diameter
Φ4.91 ± 0.1 mm
Process Tube Diameter
Φ6.5 ± 0.1 mm
Displacement Volume
12 cm³
Net Weight (Oil Included)
8.5 ± 0.4 kg
Base Plate Type
European Standard (170 × 70 mm)
Additionally, the unit is designed for static cooling and has no water tray holder included.
2. Electrical and Operational Parameters
The PZ120H1Y is engineered to operate under specific electrical conditions:
Parameter
Value
Nominal Voltage
220–240V / 50Hz
Voltage Range
187V to 254V
Starting Ability
187V [0.95/0.95 Mpa (abs)] at 25°C
Puissance (Power Input)
114 W (~0.153 hp)
Classified Power (HP)
1/3 hp
The compressor’s motor is designed for low back pressure (LBP) applications, making it suitable for systems requiring stable operation under varying load conditions.
3. Performance Metrics
Under standard ASHRAE test conditions , the PZ120H1Y demonstrates impressive performance:
Performance Parameter
Value
Cooling Capacity
210 W
Input Power
114 W (~0.153 hp)
COP (Coefficient of Performance)
1.85 W/W
Sound Level
≤42 dB(A)
Vibration
Minimal
Test conditions are as follows:
Condition
Temperature
Evaporating Temperature
-23.3°C (LBP)
Condensation Temperature
54.4°C
Ambient Temperature
32.2°C to 35°C
Subcooling Temperature
46.1°C
These parameters ensure reliable operation across a wide range of environmental conditions.
4. Packaging and Transportation
For safe delivery, the PZ120H1Y is packaged with meticulous attention to detail:
Parameter
Value
Package Dimensions
1140 × 940 × 1020 mm
Stacking Capacity
96 units per pallet
Net Weight (N.W.)
816 kg
Gross Weight (G.W.)
851 kg
Cubic Measure
1.1 m³
The compressor can be transported via train or automobile, ensuring flexibility in logistics.
5. Operational Considerations
To maximize the lifespan and efficiency of the PZ120H1Y, certain operational guidelines must be followed:
Parameter
Value
Maximum Shell Temperature
120°C
Maximum Discharge Temperature
90°C
Maximum Condensing Temperature
130°C
Ambient Temperature Range
-5°C to 43°C
Evaporating Temperature Range
-35°C to -10°C
Intermittent Operation
ON > 5 minutes, OFF > 5 minutes
Operational Cycle Limit
< 200,000 cycles
A critical note: Pressure balancing between the high-pressure and low-pressure sides is essential at startup to ensure proper functioning. If pressure imbalance occurs, the starting performance must be checked.
6. Environmental Compliance
The PZ120H1Y adheres to stringent environmental regulations:
Regulation
Compliance
PAHs (II)
BaP content <1 ppm, Total PAHs <10 ppm
REACH Regulations
SVHC <1000 ppm
Phthalic Acid Salt Limits
Harmful substances <1000 ppm
These measures ensure that the compressor aligns with global environmental safety standards.
7. Component List
Each PZ120H1Y compressor comes with the following components, all independently packaged:
Component
Amount
Compressor
1 unit
PTC
1 unit
OLP
1 unit
Capacitor
1 unit
Terminal Cover
1 unit
Earthing Screw
1 unit
Grommets
4 units
Conclusion
The GMCC PZ120H1Y reciprocating compressor stands out for its robust design, energy efficiency, and compliance with environmental standards. With a cooling capacity of 210 W and input power of 114 W (~0.153 hp) , it delivers reliable performance for low-back-pressure applications. Classified as 1/3 hp , this compressor is ideal for domestic and light commercial refrigeration systems.
Whether for static cooling or systems requiring intermittent operation, the PZ120H1Y is a dependable choice for modern refrigeration needs.
This article captures all the details from the PDF, organized into tables for clarity and includes both the exact power input (in watts) and the classified horsepower (1/3 hp). Let me know if you’d like any further adjustments!
LBP Compressors with R134A Refrigerant: A Comprehensive Overview
LBP compressors, renowned for their reliability and efficiency, are widely used in various refrigeration applications. This article delves into the specifications of a range of LBP compressors that utilize R134A refrigerant, providing detailed information on their performance parameters and operational characteristics.
Table of Specifications
The table below outlines the key specifications for each model of the LBP compressors:
Model
Displacement (cm³)
Operating Voltage V/Hz
Power HP
Nominal Capacity Kcal
COP W/W
Motor Type
Capacitor Used
GM 35 AF
3.50
187-264V/50Hz
1/10
65
1.05
RSIR/RSCR
2 µF
GM 55 AF
5.48
1/6
118
1.06
3 µF
GM 70 AF
6.64
1/5
158
1.17
4 µF
GM 66 AF
6.60
1/5
147
1.28
4 µF
GM 75 AF
7.39
1/4
172
1.20
4 µF
GM 77 AF
7.70
1/4
165
1.29
4 µF
GM 80 AF
8.10
1/4+
198
1.26
4 µF
GM 91 AF
9.10
1/4+
185
1.29
4 µF
GM 80 AF + kap
8.10
1/4+
198
1.26
CSCR
4 µF
Key Features and Performance Metrics
Displacement : The displacement values range from 3.50 cm³ to 9.10 cm³, indicating the volume of refrigerant that can be compressed per cycle. Higher displacement models like GM 91 AF are suitable for larger cooling capacities.
Operating Voltage : All models operate within the voltage range of 187-264V at a frequency of 50Hz, ensuring compatibility with standard electrical supplies.
Power HP : The power ratings vary from 1/10 HP to 1/4+ HP, reflecting the energy consumption and output capacity of each compressor. Models with higher power ratings, such as GM 80 AF and GM 91 AF, are designed for more demanding applications.
Nominal Capacity : The nominal cooling capacities range from 65 Kcal to 198 Kcal, catering to different cooling requirements. For instance, the GM 80 AF and GM 80 AF + kap models both offer a high cooling capacity of 198 Kcal.
COP (Coefficient of Performance) : The COP values indicate the efficiency of the compressors, with higher values signifying better performance. The GM 66 AF model boasts a COP of 1.28, making it one of the most efficient in the lineup.
Motor Type : Most models feature RSIR/RSCR motor types, known for their robustness and reliability. The GM 80 AF + kap model, however, uses a CSCR motor type, which may offer additional benefits depending on the application.
Capacitor Used : The capacitors used range from 2 µF to 4 µF, aiding in the starting and running of the motors. The GM 80 AF + kap model, with its additional start capacitor, ensures smoother operation under varying load conditions.
Additional Notes
All the models listed can be equipped with RUN CAPACITORS upon request, enhancing their performance and longevity.
The GM 80 AF + kap model is specifically designed with an additional start capacitor, making it ideal for applications requiring enhanced starting torque.
In conclusion, the LBP compressors with R134A refrigerant offer a versatile range of options to meet diverse cooling needs. Their robust design, coupled with high efficiency and reliability, makes them a preferred choice for various refrigeration systems.
