The AGC5568EXG compressor has a capacity of 5.5 horsepower, which translates to approximately 4 tons of refrigeration. However, it’s important to note that the exact tonnage can vary depending on several factors, including:
Evaporating temperature: The compressor’s capacity is typically rated at a specific evaporating temperature, usually around 45°F (7°C). If your application operates at a different temperature, the actual tonnage will be higher or lower.
Condensing temperature: The condensing temperature also affects the compressor’s capacity. Higher condensing temperatures will result in lower tonnage.
Refrigerant type: The AGC5568EXG is designed for use with R22 refrigerant, but it may also be compatible with other refrigerants. However, the capacity will vary depending on the specific refrigerant used.
Therefore, to get the most accurate estimate of the AGC5568EXG’s tonnage for your specific application, it’s best to consult the manufacturer’s technical data sheet or contact a qualified refrigeration technician. They can consider all the relevant factors and provide you with a more precise tonnage calculation.
Product Family
AG144UT-001-J7 compressor R22 460V 3ph 5-1/2 HP air conditioning
Mbsm.pro, AC Compressor, 2 Ton, 208-230v, Bristol, H21J20BABC, H22B203ABC, H21J193ABC, r22, Capacitor 30 uf
Category: air conditioner
written by www.mbsm.pro | 4 February 2024
AC Compressor 2 Ton 208-230v Fits Bristol H21J20BABC H22B203ABC H21J193ABC
This is a 2 Ton 208/220 Volts 1-Phase Direct Factory Replacement Copeland Scroll Compressor. The Copeland Model # is CR20K6-PFV-875. It is rated at 20,000 BTU. It is designed to replace the obsolete part numbers listed in the title. In some instances, small piping changes may be required. Thanks for looking and good luck!
TECHNICAL SPECIFICATIONS.
Tonnage: 1.5-2 Volts 60 Hz 208/230-1. Phase 1. Refrigerant Type R-22. Line Connection Suction ID (In) 3/4 Line Connection Discharge ID (In) 3/8 Base Mounting Centers (In) 7 1/2 x 7 1/2. Application OEM A/C Equipments. Includes Crankcase Heater.
The Required Run Capacitor is 30 uf 370 volt. Most condensing unit capacitors are dual capacitors, meaning they operate the compressor and the fan. To purchase the correct capacitor you will need to know the uf rating on the fan.
Start Capacitor rating, if needed, is 145-174 250 Volt
To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final! There are NO WARRANTIES! Compressors Should be installed by a qualified Heating Air Conditioning Tech.
Dimensions: 1030 x 313 x 221 mm (width x height x depth)
Weight: 17 kg
Features:
Split-type air conditioner
Carrier Optimax series
Wall-mounted unit
Remote control
Sleep mode
Turbo mode
Self-diagnosis function
Refrigerant type: R22
Additional information:
42khrt24 is typically paired with the outdoor unit model 38khrt24.
This air conditioner system is designed for cooling rooms up to approximately 70 square meters (750 square feet).
It is available in some regions, but not all.
Mbsm.pro, Compressor, 55R613G T-9ASM, 12000 btu, r22, 1 Ton, 1.5 hp, Air conditioner, 220 v 1ph
Category: air conditioner
written by www.mbsm.pro | 4 February 2024
The 55R613G T-9ASM is a rotary compressor used in air conditioners. It is a 12,000 BTU compressor that operates on 220 volts and 50 hertz. It is manufactured by KTN, a Chinese company that has been in the air conditioning and refrigeration business for over 15 years.
The 55R613G T-9ASM is a hermetic motor compressor, which means that the motor and compressor are sealed in a single unit. This design helps to protect the compressor from the elements and makes it more energy efficient.
The compressor uses R22 refrigerant, which is a common refrigerant used in air conditioners. However, R22 is being phased out in many countries due to its environmental impact. KTN also offers compressors that use R410A refrigerant, which is a more environmentally friendly refrigerant.
The 55R613G T-9ASM is a widely used compressor that can be found in a variety of air conditioners. It is a reliable and efficient compressor that is a good choice for many applications.
Used DWM Copeland DBRE4-0750-TFD-521 // 50Hz / 380-420V / 18,5A / 2900rpm / 30,85 m3/h // Max Oper. Press H/L 26,5/17 bar. *Why choose for HOSBV? Were not only the largest used refrigeration specialist in Europe, but also, we deliver all equipment including an extensive test, warranty and industrial cleaning. *Optional we can also perform a new paint job and arrange the logistics.
Specifications
No.
7956
Brand
DWM
Type
DBRE4-0750-TFD-521
Refrigerant
Freon
Refrigerant type
R 404 A or other types
kW at +10ºC/+40ºC
25,1
kW at 0ºC/+40ºC
17,2
kW at -5ºC/+40ºC
13,9
Remarks |
*Capacity based on (ZR94KC-TFD-523) / DBRE4-0750-TFD NO LONGER AVAILABLE. REFER TO SCROLL ZR94 (See pdf for more details)
Cooling capacity: 30,299 BTU/h. This translates to approximately 3 HP (horsepower). However, it’s important to note that HP is not a perfect conversion for cooling capacity, and the actual cooling output can vary depending on various factors like operating conditions and refrigerant type.
Refrigerant gas: R22 (note that R22 is being phased out in some countries due to environmental concerns)
Input power: 2090W
Voltage: 220-240V, 50Hz, 1 Phase
Applications: air conditioners, dryers, refrigerators, chillers, etc.
