Refrigerating compressor TW 1390 YS manufactured by Tecumseh running on R134 refrigerant. Application type: low temperature. Supply voltage: single-phase 220-240 V at 50 Hz. Cooling capacity: 271 W at To = -23.3°C.
TECUMSEH TW 1374 Y 1/4 hp R134a motor compressor. TECUMSEH model TW 1374 with R134a refrigerant and 1/4 Hp with a performance of 165 frigories for two cold and No Frost refrigerators.
Medidas: 27 x 17 x 20 cm.
Weight: 15kg.
compressor capacity TW1374YS
From 1/8 to 1/5 of HP 3 meters of capillary 0.031 in inches or 0.80 millimeters
From 1/4 3 meters of capillary 0.036 in inches or 0.914 millimeters
From 1/3 3 meters of capillary 0.042 in inches or 1.067 millimeters
| Gaz frigorifique | R134a |
|---|---|
| Puissance électrique du moto-compresseur (CV) | 1/7 220v-50Hz-0.71A-3/16″-1/4″ |
| Hauteur-Longueur-Largeur | 220-251-161mm |
| Huile | 0.280Litre Polyolester-poe |
| Puissance frigorifique (W) | 140 |
| Régime des mesures | Température d’évaporation : -23.3 °C – Pression d’évaporation :1.15bar / Température de condensation :54.4°C – Pression de condensation: 14.7bar |
| Utilisation | Refrigérateur de capacité entre 200 et 250 litre |
| Condition | Test Voltage | (R) Btu/h | (R) kcal/h | (R) W | (I) W | (E) Btu/Wh | (E) kcal/Wh | W/W | EVAP TEMP | COND TEMP | AMBIENT TEMP | RETURN GAS | LIQUID TEMP |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CECOMAF | 220V ~ 50HZ | 335 | 84 | 98 | 99 | 3.38 | .85 | .99 | -23°C (-10°F) | 55°C (131°F) | 32°C (90°F) | 32°C (90°F) | 55°C (131°F) |
| ASHRAE | 220V ~ 50HZ | 460 | 116 | 135 | 108 | 4.26 | 1.07 | 1.25 | -23°C (-10°F) | 54°C (130°F) | 32°C (90°F) | 32°C (90°F) | 32°C (90°F) |
Evaporating Temp. Range: |
-34.4°C to -12.2°C (-30°F to 10°F) |
Motor Torque: |
Low Start Torque (LST) |
Compressor Cooling: |
Static |
Weight: |
8 |
Weight Unit of Measure: |
KG |
Displacement (cc): |
5.01 |
Oil Type: |
Polyolester |
Viscosity (cSt): |
10 |
Oil Charge (cc): |
243 |
Voltage Range (50 Hz): |
195-253 |
Voltage Range (60 Hz): |
N/A |
Locked Rotor Amps (LRA): |
9 |
Rated Load Amps (RLA 50 Hz): |
.71 |
Rated Load Amps (RLA 60 Hz): |
0 |
Max. Continuous Current (MCC in Amps): |
0 |
Motor Resistance (Ohm) – Main: |
21.76 |
Motor Resistance (Ohm) – Start: |
30.57 |
MotorType: |
PTCCS_IR |
Overload Type: |
N/A |
Relay Type: |
N/A |
For R-600, Low Temperature (LBP)
Power = 165W
(Made in China – Wanbao Group Compressor Co.Ltd)
Compressor EKA95L 220-240V, 50Hz is used in domestic refrigerators and commercial equipment.
Freon – R600a
Application – low-temperature equipment
Cooling capacity (according to ASHRAE, Тk 54.4°C, Ti -23.3°C) – 165 W.
Power consumption (according to ASHRAE, Тk 54.4°C, Ti -23.3°C) – 122.5 W.
Cylinder volume – 9.5 cm³
Country of origin – China
Compressor ACC Cubigel Huayi Electrolux ZEM GPY14RAa, HMBP – R134a, 220 V/1/50Hz, 3/8 HP, discharge 14.32 cm3, motor type CSIR, oil type ISO VG 22 ester, oil charge 400 cm3, 1161 W at +5 / +55 °, input power, current 585 W, 3.42 A,expansion device: capillar or valve, cooling: fan, weight 12.6 kg , the statutory warranty period shall apply (24 months), Delivery time Info: with “immediately available” and “scarce stock”, usually delivery within 2 days. For “currently not available” delivery time usually 2 weeks or delivery time in urgent cases contact us.
| Refrigerant: | R134a |
| Power range(W): | 1 – 1,5 kW |
| Connecting size: | 6,5 mm |
| Suction: | 8,1 mm |
| Working area: | HMBP |
| Design type: | Hermetic |
| Model series: | GPY |
| Use with: | Expansion/Capillary |
| Power range(HP): | 0-2 |
| Power supply: | 230 V |
| Oil type: | ISO VG 22 Ester |
| Engine type: | CSIR |
| Article condition: | New |
| Info: | Oil filled |
| Shipping weight: | 14,60 Kg |
| Dimensions ( length × width × height ): | 23,10 × 16,20 × 21,10 cm |
| customs tariff number: | 84143081 |
| Cooling capacity condition: | +5 / +55 C |
| Manufacturer: | ACC Cubigel Huayi Electrolux ZEM |
| Model: | GPY14RAa |
| Stroke volume (cm3): | 14,32 |
| Cooling capacity (W): | 1161 |
| Power (HP): | 0,4 |
| Power consumption (W): | 585 |
| Max. Starting current (A): | 16 |
| Max. Operating current (A): | 3,42 |
| Engine type: | CSIR |
| Note: | Fan cooling necessary |
| Oil quantity (l): | 0,4 |
| Compressor type: | Piston |
| Cooling: | Fan |
| Pressure line (mm): | 6,5 |
| Suction line (mm): | 8,1 |
| Model | Gas | HP | Voltage | Code | Details |
| SC10C | R22 | 1/3 | 1ph/220V-240/50HZ | 104L2516 | MLBP HST |
| SC12C | R22 | 3/8 | 1ph/220-240V/50HZ | 104L2674 | MLBP HST |
| SC15CM | R22 | 1/2 | 1ph/220V-240V/50HZ | 104L2848 | MLBP HST |
| SC18CM | R22 | 5/8 | 1ph/220-240V/50HZ | 104L2120 | MLBP HST |
| SC10D | R22 | 3/8 | 1ph/220-240V/50HZ | 104L2529 | MHBP HST |
| SC12D | R22 | 1/2 | 1ph/220-240V/50HZ | 104L2694 | MHBP HST |
| SC15D | R22 | 5/8 | 1ph/220-240V/50HZ | 104L2859 | MHBP HST |
| SC10CL | R404A | 1/3 | 1ph/220-240V/50HZ | 104L2523 | LMBP HST |
| SC12CL | R404A | 3/8 | 1ph/220-240V/50HZ | 104L2623 | LMBP HST |
| SC15CL | R404a | 1/2 | 1ph/220-240V/50HZ | 104L2853 | LMBP HST |
| SC18CL | R404a | 5/8 | 1ph/220V-240V/50HZ | 104L2123 | LMBP HST |
| SC21CL | R404a | 7/8 | 1ph/220-240V/50HZ | 104L2322 | LBP HST |
| SC10G | R134a | 5/16 | 1ph/220-240V/50HZ | 104G8000 | LMHBP HST |
| SC12G | R134a | 1/3 | 1ph/220-240V/50HZ | 104G8240 | LMHBP HST |
| SC15G | R134a | 3/8 | 1ph/220V-240V/50HZ | 104G8520 | LMHBP HST |
| SC18G | R134a | 1/2 | 1ph/220-240V/50HZ | 104G8820 | LMHBP HST |
| SC21G | R134a | 5/8 | 1ph/220-240V/50HZ | 104G8140 | LMHBP HST |
| Gross weight | 14.03 kg |
| Net weight | 14.03 kg |
| Gross weight | 14.03 kg |
| Net weight | 14.03 kg |
| Application energy level | Standard LBP |
| Applications | LBP |
| Auxiliary winding resistance (start winding) for single-phase compressors [Ohm] | 13.6 Ohm |
| Auxiliary winding resistance (start winding) for single-phase compressors alt [Ohm] | 13.6 Ohm |
| Base plate type | Universal |
| Brand technique | Reciprocating compressor |
| Capacity control | Fixed speed |
| Colour | Black |
| Compressor power supply [V/Ph/Hz] | 220-240/1/50 |
| Configuration code | Single |
| Cut in current HST [A] | 23.6 A |
| Description | SC21CL |
| Discharge connection angle [°] | 37 ° |
| Discharge connection comments | Rubber plug |
| Discharge connection diameter [mm] | 6.2 mm |
| Discharge connection height [mm] | 100 mm |
| Discharge connection material | Copper |
| Economizer | No |
| Free gas volume [cm3] | 1410 cm3 |
| Frequency [Hz] | 50 |
| Height from baseplate [mm] | 203 mm |
| High value of nominal voltage at 50Hz [V] | 240 V |
| High value of nominal voltage at 60Hz [V] | 0 V |
| High value of voltage range at 50Hz [V] | 264 V |
| High value of voltage range at 60Hz [V] | 0 V |
| Length [mm] | 255 mm |
| Liquid injection | No |
| Low value of nominal voltage at 50Hz [V] | 220 V |
| Low value of nominal voltage at 60Hz [V] | 0 V |
| Low value of voltage range at 50Hz [V] | 198 V |
| Low value of voltage range at 60Hz [V] | 0 V |
| LRA HST 60Hz [A] | 23.6 A |
| LRA HST [A] | 23.6 A |
| Main winding resistance for single-phase compressors [Ohm] | 3.3 Ohm |
| Model number | SC21CL |
| Motor type | CSR |
| No. of phases (compressor) | 1 |
| No. of phases (fan) | 1 |
| Oil quantity [cm3] | 550 cm3 |
| Oil type | POE |
| Packing format | Industrial pack |
| Packing quantity | 80 |
| Phase | 1 |
| Process connection angle [°] | 37 ° |
| Process connection comments | Rubber plug |
| Process connection diameter [mm] | 6.2 mm |
| Process connection height [mm] | 183 mm |
| Process connection material | Copper |
| Refrigerant | R404A R507 |
| Refrigerant charge [kg] [Max] | 1.3 kg |
| RLA | 4.00 A |
| Rotational speed at 50Hz [rpm] | 2900 rpm |
| Rotational speed at 60Hz [rpm] | 0 rpm |
| Run capacitor capacitance | 10 µF |
| Segment usage | Refrigeration LT |
| Start capacitor capacitance | 80 µF |
| Suction connection angle [°] | 37 ° |
| Suction connection comments | Rubber plug |
| Suction connection diameter [mm] | 10.2 mm |
| Suction connection height [mm] | 183 mm |
| Suction connection material | Copper |
| Swept volume [cm3] | 20.95 cm3 |
| Technology | Reciprocating |
| Total height [mm] | 209 mm |
| Type | SC |
| Type designation | Compressor |
| Voltage 50Hz [V] | 220 V |
| Voltage 50Hz [V] [Max] | 240 V |
| Width [mm] | 151 mm |
| Winding temperature short term [°C] [Max] | 135 °C |
| Winding temperature stat [°C] [Max] | 125 °C |
| Application energy level | Standard LBP |
| Applications | LBP |
| Auxiliary winding resistance (start winding) for single-phase compressors [Ohm] | 13.6 Ohm |
| Auxiliary winding resistance (start winding) for single-phase compressors alt [Ohm] | 13.6 Ohm |
| Base plate type | Universal |
| Brand technique | Reciprocating compressor |
| Capacity control | Fixed speed |
| Colour | Black |
| Compressor power supply [V/Ph/Hz] | 220-240/1/50 |
| Configuration code | Single |
| Cut in current HST [A] | 23.6 A |
| Description | SC21CL |
| Discharge connection angle [°] | 37 ° |
| Discharge connection comments | Rubber plug |
| Discharge connection diameter [mm] | 6.2 mm |
| Discharge connection height [mm] | 100 mm |
| Discharge connection material | Copper |
| Economizer | No |
| Free gas volume [cm3] | 1410 cm3 |
| Frequency [Hz] | 50 |
| Height from baseplate [mm] | 203 mm |
| High value of nominal voltage at 50Hz [V] | 240 V |
| High value of nominal voltage at 60Hz [V] | 0 V |
| High value of voltage range at 50Hz [V] | 264 V |
| High value of voltage range at 60Hz [V] | 0 V |
| Length [mm] | 255 mm |
| Liquid injection | No |
| Low value of nominal voltage at 50Hz [V] | 220 V |
| Low value of nominal voltage at 60Hz [V] | 0 V |
| Low value of voltage range at 50Hz [V] | 198 V |
| Low value of voltage range at 60Hz [V] | 0 V |
| LRA HST 60Hz [A] | 23.6 A |
| LRA HST [A] | 23.6 A |
| Main winding resistance for single-phase compressors [Ohm] | 3.3 Ohm |
| Model number | SC21CL |
| Motor type | CSR |
| No. of phases (compressor) | 1 |
| No. of phases (fan) | 1 |
| Oil quantity [cm3] | 550 cm3 |
| Oil type | POE |
| Packing format | Industrial pack |
| Packing quantity | 80 |
| Phase | 1 |
| Process connection angle [°] | 37 ° |
| Process connection comments | Rubber plug |
| Process connection diameter [mm] | 6.2 mm |
| Process connection height [mm] | 183 mm |
| Process connection material | Copper |
| Refrigerant | R404A R507 |
| Refrigerant charge [kg] [Max] | 1.3 kg |
| RLA | 4.00 A |
| Rotational speed at 50Hz [rpm] | 2900 rpm |
| Rotational speed at 60Hz [rpm] | 0 rpm |
| Run capacitor capacitance | 10 µF |
| Segment usage | Refrigeration LT |
| Start capacitor capacitance | 80 µF |
| Suction connection angle [°] | 37 ° |
| Suction connection comments | Rubber plug |
| Suction connection diameter [mm] | 10.2 mm |
| Suction connection height [mm] | 183 mm |
| Suction connection material | Copper |
| Swept volume [cm3] | 20.95 cm3 |
| Technology | Reciprocating |
| Total height [mm] | 209 mm |
| Type | SC |
| Type designation | Compressor |
| Voltage 50Hz [V] | 220 V |
| Voltage 50Hz [V] [Max] | 240 V |
| Width [mm] | 151 mm |
| Winding temperature short term [°C] [Max] | 135 °C |
| Winding temperature stat [°C] [Max] | 125 °C |
Refrigerant: R404A; R507, Segment usage: Refrigeration LT, Compressor power supply [V/Ph/Hz]: 220-240/1/50
1.Product Performance
1)ADW91, MK series, use R134A refrigerant;
2)Voltage application 220V to 240V;
3)Frequency for 50/60HZ;
4)Motor type: RSIR;
5)Cooling type: ST;
6)Starting device is PTC Relay;
7)Application: Low Back Pressure;
8)Nominal power is 1/3 HP;
9)COP is 1.25 with the cooling capacity 220W.
Basing on Test Condition(ASHRAE)
Evaporating Temperature: -23.3 degree
Ambient Temperature: 32.2 degree
Subcooling Temperature: 32.2 degree
Condensing Temperature: 54.4 degree
Suction Temperature: 32.2 degree
| Serial | Model | HP | V/Hz | Dispt (cm3) | Cooling Capacity (ASHRAE) | Motor type | |||||
| Test Conditions:-23.3℃(-10F) | |||||||||||
| Capacity (W) | Capacity (Btu/h) | lnput Power(W) | Current (A) | COP | EER | ||||||
| L | QD25HG | 1/12 | 220-240V/50-60Hz | 2.5 | 55 | 188 | 52 | 0.55 | 1.05 | 3.61 | RSIR |
| QD30HG | 1/12 | 3.0 | 65 | 222 | 62 | 0.63 | 1.05 | 3.58 | RSIR | ||
| QD35HG | 1/11 | 3.5 | 75 | 256 | 71 | 0.68 | 1.05 | 3.60 | RSIR | ||
| ADW43 | 1/6- | 4.3 | 110 | 375 | 100 | 1.0 | 1.1 | 3.75 | RSIR | ||
| ADW51 | 1/6 | 5.1 | 125 | 427 | 104 | 1.1 | 1.2 | 4.10 | RSIR | ||
| ADW57 | 1/5- | 5.7 | 135 | 461 | 112 | 1.15 | 1.2 | 4.11 | RSIR | ||
| MS | ADW43 | 1/6- | 4.3 | 110 | 375 | 100 | 1.0 | 1.1 | 3.75 | RSIR | |
| ADW51 | 1/6 | 5.1 | 125 | 427 | 104 | 1.1 | 1.2 | 4.10 | RSIR | ||
| ADW57 | 1/5- | 5.7 | 135 | 461 | 112 | 1.15 | 1.2 | 4.11 | RSIR | ||
| ADW66 | 1/4- | 6.6 | 165 | 563 | 132 | 1.2 | 1.25 | 4.27 | RSIR | ||
| ADW77 | 1/4 | 7.7 | 185 | 631 | 148 | 1.4 | 1.25 | 4.27 | RSIR | ||
| ADW86 | 1/4+ | 8.6 | 200 | 682 | 160 | 1.45 | 1.25 | 4.27 | RSIR | ||
| ADW91 | 1/3- | 9.1 | 220 | 751 | 176 | 1.65 | 1.25 | 4.27 | RSIR | ||
| LM | ADW43 | 1/6- | 4.3 | 110 | 375 | 100 | 1.0 | 1.1 | 3.75 | RSIR | |
| ADW51 | 1/6 | 5.1 | 125 | 427 | 104 | 1.1 | 1.2 | 4.10 | RSIR | ||
| ADW57 | 1/5- | 5.7 | 135 | 461 | 112 | 1.15 | 1.2 | 4.11 | RSIR | ||
| ADW66 | 1/4- | 6.6 | 165 | 563 | 132 | 1.2 | 1.25 | 4.27 | RSIR | ||
| ADW77 | 1/4 | 7.7 | 185 | 631 | 148 | 1.4 | 1.25 | 4.27 | RSIR | ||
| MK | ADW66 | 1/4- | 6.6 | 165 | 563 | 132 | 1.2 | 1.25 | 4.27 | RSIR | |
| ADW77 | 1/4 | 7.7 | 185 | 631 | 148 | 1.4 | 1.25 | 4.27 | RSIR | ||
| ADW86 | 1/4+ | 8.6 | 200 | 682 | 160 | 1.45 | 1.25 | 4.27 | RSIR | ||
| ADW91 | 1/3- | 9.1 | 220 | 751 | 176 | 1.65 | 1.25 | 4.27 | RSIR | ||
| ADW110 | 3/8 | 11.0 | 270 | 921 | 215 | 2.05 | 1.25 | 4.28 | RSIR | ||
| WQ | ADW91 | 1/3- | 9.1 | 220 | 751 | 176 | 1.65 | 1.25 | 4.27 | RSIR | |
| ADW110 | 3/8 | 11.0 | 270 | 921 | 215 | 2.05 | 1.25 | 4.28 | RSIR | ||
| ADW128 | 3/8+ | 12.8 | 320 | 1092 | 256 | 2.3 | 1.25 | 4.27 | CSIR | ||
| ADW142 | 1/2- | 14.2 | 350 | 1194 | 280 | 2.6 | 1.25 | 4.27 | CSIR | ||
| ADW153 | 1/2 | 15.3 | 380 | 1297 | 304 | 2.8 | 1.25 | 4.27 | CSIR | ||
