Compresor Copeland Scroll ZR36KC-PFV

Compresor Copeland Scroll ZR36KC-PFV

Datos Técnicos

HCFC, R-22, 60 Hz, 1-phase, 208/230 V

Air Conditioning

Performance

Evaporator Temp. (ºF)  45.00  45.00

Condensing Temp. (ºF)  130.00  100.00

Return Gas Temp. (ºF)  65  65

Liquid Temp. (ºF)  115  85

Capacity (Btu/hr)  36900  43400

Power (W): 3350  2410

EER (Btu/Wh):  11.00  18.00

Mass Flow (Ibs/hr): 540  560

Current (Amps):  15.90  12.10

Sound Data

Sound Power (dBA):  71 Avg  76 Max

Vibration (mils(peak-peak)):  2.000 Avg  3.000  Max

Record Date: 2006-04-18

Compresor Copeland Scroll ZR36KC-PFV

Mechanical

Displ(in^3/Rev):  3.02

Displ(ft^3/hr):  367.01

Overall Length (in): 9.69

Overall Width (in): 9.69

Overall Height (in): 15.73

Mounting Length (in): 7.50

Mounting Width (in): 7.50

Mounting Height (in): 15.97*

Suction Size (in) Type:   3/4 Stub

Discharge Size (In) Type:  1/2  Stub

Initial Oil Charge (oz): 42

Oil Recharge (oz): 38

Net Weight (ibs): 60.00

Internal Free Volume (in^3): 161.00

Horse Power: 3

*Overal compressor height on Copeland Brand Product´s specified mounting grommets.

Compresor Copeland Scroll ZR36KC-PFV

Electrical

LRA-High*(Amp):  100.0

LRA Low*(Amp):  NA

LRA-Half Winding(Amp): NA

MCC (Amps): 25.0

Max Operating Current(Amp):  3500

RLA(=MCC/1.4;use for contactor selection (Amp): 17.

RLA(=MCC/1.56;use for breaker & wire size selection)(Amp):  16

RPM: 21.2

UL File No:  SA-2337

UL File Date:  14-JUN-1994

*Low and High refer to the low and high nominal voltage ranges for which the motor is approved.

Capacitors

Start Capacitor:

Low MFD: 40.0

High MFD: 0.0

Volts: 440

User Description: NA

Compresor Copeland Scroll ZR36KC-PFV

Alternate Applications

Refrigerante: R-22 HCFC

Voltaje: NA

Fase: 1

Freq (Hz): 50

Aplicación: Air Conditioning

2.5 – 3 Ton’s 208/230 Volt 1-Phase 32,000 BTU Direct Factory Replacement Copeland Compressor.  The Model # is CR32K6-PFV-875.  This is Copeland’s recommended replacement for old Copeland Model #s CR32KQ-PFV-980WB & SRM4-0275-PFV.   It is rated at 32,000 BTU.  This compressor may or may not require small piping changes at installation. Thanks for looking and good luck!

Electrical : 220-240 V/50 Hz. 1 Phase
Nominal Performance
Capacity 6,140 / – Watts
20,950 / – BTU/Hr
5,280 / – Kcal/Hr
Power Input 2,089 / – Watts
Locked Rotor Amps 51.30 / – Amps
Max Continuous Current – / – Amps
Rated Load Amps 9.64 / – Amps
COP 2.94 / – Watts / Watts
EER 10.03 / – BTU/W-Hr
Testing Conditions
Condensing Temperature 54.40 °C 129.9 °F
Evaporating Temperature 7.20 / – °C 45.0 / – °F
Liquid Temperature 46.10 °C 115.0 °F
Return Gas Temperature 35.00 °C 95.0 °F
Ambient Temperature 35.00 °C 95.0 °F
Application
Evaporating Temp. Range HBP, A/C @ 0.00 ° C to 13.00 ° C
(32.0° F to 55.4° F)
Heat Pump -23.30 ° C to 13.00 ° C
(-9.9° F to 55.4° F)
Refrigerant R22
Refrigerant Flow Control Capillary Tube
Compressor Cooling Fan
Compressor and Motor data
Compressor Type Reciprocating
Displacement 43.10 cc.
Oil Type Mineral Oil
Oil Charge 964 cc.
Motor Type P.S.C ; 2 Pole 2,850 / – r/m
Voltage Range 198-264/- Volts 50/- Hz.
Winding Resistance at 25 ° C
Start 2.52 Ohms
Run 1.24 Ohms
Weight with Oil 27.72 Kg.
Weight with Oil and Accessories 28.05 Kg.
Electrical Components
Motor Protector
Type Internal Overload
Model Number 4042KGE661-2
Open / Close 125-135 / 50-70 ° C
1st Cycle trip at 25 ° C 50.00 Amps(main) 30.00 Amps(start)
Motor Starter
Type Potential Relay
Model Number 4043KGE681-4(RVA3G6D)
Pick Up (max.) 180.00-195.00 Volts
Drop Out (min.) 40.00-90.00 Volts
Terminal Cover KGM 901-3
Start Capacitor 88-106 µF 330 VAC.
Disch Resistor for Start Cap –
Run Capacitor 45 µF 370/440 VAC.
Mounting Kit
Rubber Grommet 4007KGM905-2
Sleeve Grommet 4023KGM903-2
Washer –
Since we are constantly improving our product , the
specification are subject to change without notice.
REV. DATE C / N No.
ECN 01-04-14 ECN 0515/13

Ariston AB 636 T EX: Technical Identification Plate Guide for Repair and Maintenance

Overview of the Ariston AB 636 T EX Plate

The image shows the rating plate of an Ariston AB 636 T EX front‑loading washing machine, a classic European model widely sold in the late 1990s and early 2000s. This metal label concentrates the essential electrical and mechanical data needed for correct installation, troubleshooting, and ordering spare parts.​

Decoding the Electrical Specifications

The plate confirms that the machine operates on 220–230 V, 50 Hz single‑phase power, drawing a maximum power of 2300 W and a nominal current of 10 A. These values indicate that the washer is designed for typical European domestic circuits and must be connected to a properly grounded outlet protected by a 10–16 A breaker.​

Technicians use the Pmax 2300 W figure to size wiring, check energy consumption, and verify heater and motor performance during diagnostics. Overheating, tripped breakers, or burned connectors often result from ignoring these limits during installation or repair.​

Mechanical Data and Pressure Switch Range

On the lower part of the label, the plate lists maximum load 5 kg and a spin speed of about 600 rpm, which class the AB 636 T EX as an entry‑level to mid‑range washer by today’s standards. This moderate spin speed explains why these machines often require longer drying times compared with newer 1000–1400 rpm units.​

The marking 5–100 N/cm² refers to the water pressure range for the pressure switch and hydraulic system, compatible with standard domestic water supplies. Maintaining this range is crucial for correct filling, level detection, and safe operation of the heating element.​

Why the Rating Plate Matters for Technicians

For repair professionals and advanced DIY users, the rating plate is the identity card of the washing machine. It provides the exact model (AB 636 T EX) and type number LB 610, data that spare‑parts catalogues and service manuals use to match compatible components. Without these references, ordering parts like bearings (6203‑2Z), pressure switches, or door locks risks costly mistakes.​

The “Made in Italy” indication helps trace manufacturing standards and sometimes the availability of regional variants sharing similar mechanical parts but different decorative panels or program boards.​

Key Technical Data Table

Useful Resources: Images and Documentation

Several specialised websites still provide visual references and spare‑parts diagrams for the AB 636 T EX. High‑resolution product photos and exploded views can help confirm component positions before disassembly. These resources are particularly useful when documenting repairs or creating training content on platforms such as Mbsmgroup and Mbsm.pro.​

For deeper technical information, technicians can consult multi‑page PDF manuals and parts lists for the Ariston AB 636 T family, which cover installation, wiring diagrams, and troubleshooting charts. Such documents detail bearing codes, seal dimensions, and pressure‑switch compatibility for AB 636 T EX and its derivatives.​

The PH31VNET is a rotary compressor primarily used in refrigeration and air conditioning systems. Here are its key specifications and features:

The PH31VNET rotary compressor has a power rating of approximately 1.5 horsepower (hp). This rating is commonly used to describe the power output of compressors in air conditioning and refrigeration applications, indicating its capability to handle cooling loads effectively

Specifications

• Refrigerant Gas: R22
• Input Power: 3160W
• Cooling Capacity: 18570 BTU
• Voltage: 220-240V, 50Hz, Single Phase
• Brand: Often associated with Mitsubishi and Siam Compressor Industry Co., Ltd.

Applications

The PH31VNET compressor is suitable for various applications including:

• Air conditioning systems
• Refrigeration units
• Dryers

This model is designed to provide efficient cooling and is typically used in both residential and commercial settings. Its compatibility with R22 refrigerant makes it relevant for systems that utilize this type of gas, although there may be considerations regarding regulatory compliance for refrigerants in certain regions.Overall, the PH31VNET is recognized for its reliability and performance in cooling applications.

LG QP compressor

QP Series Rotary CompressorsIn Stock

50/60 Hz

LG compressors QP306K
Voltage : 208-230 V/ 60 hz/ 1ph
EER: 11.00 W
Refrigerant : R410A
BTU : 22,600
COP : 3.22
Tecnology : On/Off
Motor type : Single
Weight 8,6 kg
Dimensions : 28 × 28 × 38 cm
Similar models : QP325K(24,000 btu), QP348K(25,900 btu), QP362K(27,000 btu), QP376K(27,700 btu), QP390K(29,200 btu), QP407K(30,100 btu), QP425K(31,900 btu), QP306P(18,450 btu), QP325P(19,500 btu), QP348P(20,500 btu), QP376P(22,500 btu), QP390P(23,500 btu), QP407P(24,400 btu), QP425P(25,600 btu), QP425Y(25,000 btu)