Based on the technical data provided for the Evvoli air conditioning unit, here is the professional breakdown, technical table, and SEO-optimized article.

Gas Charge Calculation

To find the precise weight of the refrigerant, we use the Global Warming Potential ($GWP$) formula provided on the label:

The gas charge weight is approximately 1.80 kg (1800 grams).

---

Technical Specifications Table

Attribute	Specification Details
Model	EVCIS-24K-MD
Utilisation (mbp/hbp/lbp)	HBP (High Back Pressure)
Domaine (Freezing/Cooling)	Air Conditioning (Cooling & Heating)
Oil Type and quantity	POE Oil (Polyolester) / Approx. 650ml – 750ml
Horsepower (HP)	2.5 HP
Refrigerant Type	R410A
Power Supply	220-240V ~ 50Hz, 1Ph
Cooling Capacity BTU	24,000 Btu/h
Heating Capacity BTU	26,000 Btu/h
Motor Type	Rotary (CSR/PSC)
Displacement	22.0 to 25.0 cm³
Winding Material	High-Grade Copper
Pression Charge	Discharge: 4.2MPa / Suction: 1.5MPa
Capillary	0.070″ – 0.080″ ID (Typical for 2.0 Ton)
Modele Refrigerator Compatibility	Not for refrigerators; designed for Split AC Units
Temperature function	T1 Climate (-7°C to +43°C)
With fan or no	Yes (External Condenser Fan required)
Commercial or no	Light Commercial / Residential
Amperage in function	20.0 A (Maximum Load)
LRA (Locked Rotor Amps)	62 A – 70 A
Type of relay	Power Contactor / Start Relay
Capacitor or no and valeur	Run Capacitor: 55µF – 60µF / 450V

5 Compressor replacements (Same Gas: R410A)

1. GMCC PA240X2C-4FT
2. Highly ASD225RK-PA6AG
3. Panasonic 5PS225DAB02
4. Rechi 44R423A
5. LG GP250P

5 Compressor replacements (Other Gas: R22 Compatibility)

Note: Requires flushing system and changing oil/capillary.

1. Panasonic 2K32C225
2. GMCC PH370G2C
3. Copeland ZR28K3-PFV
4. Tecumseh AW5524E
5. Mitsubishi KH197

---

Mbsmpro.com, Compressor, EVCIS-24K-MD, 2.5 hp, Evvoli, Cooling, R410A, 24000 BTU, 20.0A, 1Ph 220-240V 50Hz, HBP

The Evvoli EVCIS-24K-MD is a high-performance rotary compressor system specifically engineered for split-type air conditioners. Delivering a powerful 24,000 BTU cooling capacity, this unit is built to withstand extreme operating pressures, reaching up to 4.2MPa on the discharge side. Utilizing R410A refrigerant, it meets modern environmental standards while providing superior heat transfer compared to legacy R22 systems.

Performance Dynamics and Comparison

When comparing the EVCIS-24K-MD to standard 18,000 BTU units, the power jump is significant. While an 18K unit typically draws 12-14 Amps, this 24K beast requires a stable 20.0A feed. This makes it ideal for large living spaces or small commercial offices where consistent cooling (and heating at 26,000 BTU) is non-negotiable.

Expert Engineering Insights

• Thermal Efficiency: The unit features an IPX4 resistance class, meaning the outdoor electrical components are protected against splashing water from any direction, crucial for rainy or humid climates.
• Installation Note: Vacuuming the system is not optional. Moisture in an R410A system reacts with POE oil to form acid, which will eventually eat through the copper windings.
• Protection: Due to the 20A draw, ensure the use of a dedicated circuit breaker.

---

Focus Keyphrase: Evvoli EVCIS-24K-MD 24000 BTU R410A Compressor Specifications

SEO Title: Mbsmpro.com, Evvoli EVCIS-24K-MD, 2.5 hp, 24000 BTU, R410A, 220V Technical Data

Meta Description: Full technical specs for Evvoli EVCIS-24K-MD Split AC. 24,000 BTU, R410A gas (1.8kg), 20A current. Includes compressor replacements (GMCC, Panasonic, LG) and wiring insights.

Slug: evvoli-evcis-24k-md-compressor-specs-r410a

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Evvoli, EVCIS-24K-MD, R410A, 24000 BTU, 2.5 HP, GMCC PA240X2C, Highly ASD225RK, Panasonic 5PS225, Rechi 44R423A, LG GP250P, Split AC Repair, HVAC Engineering.

Excerpt: The Evvoli EVCIS-24K-MD is a robust 2.5 HP rotary compressor designed for 24,000 BTU split-type air conditioners. Running on R410A refrigerant with a 20.0A rated current, it offers high-efficiency cooling and heating (26,000 BTU). This technical guide explores its pressure limits, electrical requirements, and the best replacement compressors for HVAC professionals and field workers.

Based on the technical data provided for the Evvoli air conditioning unit, here is the professional breakdown, technical table, and SEO-optimized article.

Gas Charge Calculation

To find the precise weight of the refrigerant, we use the Global Warming Potential ($GWP$) formula provided on the label:

The gas charge weight is approximately 1.80 kg (1800 grams).

---

Technical Specifications Table

Attribute	Specification Details
Model	EVCIS-24K-MD
Utilisation (mbp/hbp/lbp)	HBP (High Back Pressure)
Domaine (Freezing/Cooling)	Air Conditioning (Cooling & Heating)
Oil Type and quantity	POE Oil (Polyolester) / Approx. 650ml – 750ml
Horsepower (HP)	2.5 HP
Refrigerant Type	R410A
Power Supply	220-240V ~ 50Hz, 1Ph
Cooling Capacity BTU	24,000 Btu/h
Heating Capacity BTU	26,000 Btu/h
Motor Type	Rotary (CSR/PSC)
Displacement	22.0 to 25.0 cm³
Winding Material	High-Grade Copper
Pression Charge	Discharge: 4.2MPa / Suction: 1.5MPa
Capillary	0.070″ – 0.080″ ID (Typical for 2.0 Ton)
Modele Refrigerator Compatibility	Not for refrigerators; designed for Split AC Units
Temperature function	T1 Climate (-7°C to +43°C)
With fan or no	Yes (External Condenser Fan required)
Commercial or no	Light Commercial / Residential
Amperage in function	20.0 A (Maximum Load)
LRA (Locked Rotor Amps)	62 A – 70 A
Type of relay	Power Contactor / Start Relay
Capacitor or no and valeur	Run Capacitor: 55µF – 60µF / 450V

5 Compressor replacements (Same Gas: R410A)

1. GMCC PA240X2C-4FT
2. Highly ASD225RK-PA6AG
3. Panasonic 5PS225DAB02
4. Rechi 44R423A
5. LG GP250P

5 Compressor replacements (Other Gas: R22 Compatibility)

Note: Requires flushing system and changing oil/capillary.

1. Panasonic 2K32C225
2. GMCC PH370G2C
3. Copeland ZR28K3-PFV
4. Tecumseh AW5524E
5. Mitsubishi KH197

---

Mbsmpro.com, Compressor, EVCIS-24K-MD, 2.5 hp, Evvoli, Cooling, R410A, 24000 BTU, 20.0A, 1Ph 220-240V 50Hz, HBP

The Evvoli EVCIS-24K-MD is a high-performance rotary compressor system specifically engineered for split-type air conditioners. Delivering a powerful 24,000 BTU cooling capacity, this unit is built to withstand extreme operating pressures, reaching up to 4.2MPa on the discharge side. Utilizing R410A refrigerant, it meets modern environmental standards while providing superior heat transfer compared to legacy R22 systems.

Performance Dynamics and Comparison

When comparing the EVCIS-24K-MD to standard 18,000 BTU units, the power jump is significant. While an 18K unit typically draws 12-14 Amps, this 24K beast requires a stable 20.0A feed. This makes it ideal for large living spaces or small commercial offices where consistent cooling (and heating at 26,000 BTU) is non-negotiable.

Expert Engineering Insights

• Thermal Efficiency: The unit features an IPX4 resistance class, meaning the outdoor electrical components are protected against splashing water from any direction, crucial for rainy or humid climates.
• Installation Note: Vacuuming the system is not optional. Moisture in an R410A system reacts with POE oil to form acid, which will eventually eat through the copper windings.
• Protection: Due to the 20A draw, ensure the use of a dedicated circuit breaker.

---

Focus Keyphrase: Evvoli EVCIS-24K-MD 24000 BTU R410A Compressor Specifications

SEO Title: Mbsmpro.com, Evvoli EVCIS-24K-MD, 2.5 hp, 24000 BTU, R410A, 220V Technical Data

Meta Description: Full technical specs for Evvoli EVCIS-24K-MD Split AC. 24,000 BTU, R410A gas (1.8kg), 20A current. Includes compressor replacements (GMCC, Panasonic, LG) and wiring insights.

Slug: evvoli-evcis-24k-md-compressor-specs-r410a

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Evvoli, EVCIS-24K-MD, R410A, 24000 BTU, 2.5 HP, GMCC PA240X2C, Highly ASD225RK, Panasonic 5PS225, Rechi 44R423A, LG GP250P, Split AC Repair, HVAC Engineering.

Excerpt: The Evvoli EVCIS-24K-MD is a robust 2.5 HP rotary compressor designed for 24,000 BTU split-type air conditioners. Running on R410A refrigerant with a 20.0A rated current, it offers high-efficiency cooling and heating (26,000 BTU). This technical guide explores its pressure limits, electrical requirements, and the best replacement compressors for HVAC professionals and field workers.

Guide to Common Refrigerants: Standing, Suction and Discharge Pressures for Modern HVAC Systems

Refrigeration technicians today work with a mix of legacy and new-generation refrigerants, each with its own safe pressure range and boiling temperature. Understanding these values is essential for accurate diagnostics, safe charging and long compressor life in air‑conditioning and commercial refrigeration.​

---

Key role of pressure charts

Pressure–temperature charts and standing/suction/discharge tables give technicians a fast reference for what a system “should” be doing at a given ambient or evaporating temperature.​
Using wrong reference values can lead to over‑charging, overheating, liquid slugging or misdiagnosis of a healthy system as faulty.​

---

Overview of common refrigerants

The image groups the most used refrigerants in residential and light commercial systems: R22, R134a, R600a, R32, R290, R407C, R404A, R410A and R417 (R417A).​
Each gas has a typical standing pressure (static pressure at rest), an evaporating suction pressure, a condensing discharge pressure and a characteristic boiling point at atmospheric pressure.​

---

Typical pressure ranges from the chart

The following table summarises the indicative values shown in the chart (all pressures are approximate, for normally loaded systems at typical comfort‑cooling conditions).

Indicative pressures and boiling points

Refrigerant	Approx. standing pressure	Approx. suction pressure	Approx. discharge pressure	Boiling point (°C)	Typical replacement for
R22	150–155 psi / 1034–1069 kPa ​	60–70 psi / 413–483 kPa ​	250–300 psi / 1724–2069 kPa ​	−40.8 °C ​	R11 / legacy R22 AC ​
R134a	80–95 psi / 552–655 kPa ​	12–15 psi / 83–103 kPa ​	~150 psi / 1034 kPa ​	−26.2 °C ​	R12 in domestic & auto ​
R600a	40–50 psi / 276–345 kPa ​	≈0–1 psi / 0–7 kPa ​	~150 psi / 1034 kPa ​	−11.7 °C ​	Low‑charge fridges, R12 ​
R32	240–245 psi / 1655–1689 kPa ​	110–115 psi / 758–793 kPa ​	175–375 psi / 1207–2586 kPa ​	−52.0 °C ​	High‑efficiency R410A/R22 ​
R290	125–130 psi / 862–896 kPa ​	65–70 psi / 448–483 kPa ​	275–300 psi / 1896–2069 kPa ​	−42.1 °C ​	R22 in some systems ​
R407C	180–185 psi / 1241–1276 kPa ​	75–80 psi / 517–552 kPa ​	275–300 psi / 1896–2069 kPa ​	−45.0 °C (bubble) ​	R22 retrofits ​
R404A	180–185 psi / 1241–1276 kPa ​	80–90 psi / 552–621 kPa ​	275–300 psi / 1896–2069 kPa ​	−46.2 °C ​	R502 low‑temp systems ​
R410A	225–230 psi / 1551–1586 kPa ​	120–130 psi / 828–896 kPa ​	450–500 psi / 3103–3447 kPa ​	−51.4 °C ​	Modern R22 AC ​
R417A	~140 psi / 965 kPa standing ​	~65 psi / 448 kPa suction ​	~261 psi / 1796 kPa discharge ​	−39.0 °C ​	R22 service blend ​

These figures are not universal “set‑points”, but practical targets that help technicians decide whether a system is under‑charged, over‑charged or suffering airflow or mechanical problems.​

---

Safety, cylinder colours and replacements

Many countries use conventional cylinder colour codes to identify refrigerants quickly on site, although some regions are migrating to neutral colours with clear labelling.​
Hydrocarbons such as R290 and R600a are flammable, so working pressures must always be combined with strict leak‑prevention, ventilation and ignition‑control procedures.​

When phasing out ozone‑depleting R22, blends like R407C or R417A are often used in retrofit projects, while new high‑efficiency equipment typically relies on R410A or R32 with different design pressures.​
Comparing the standing and operating pressures during commissioning helps ensure that a replacement refrigerant is compatible with existing components such as compressors, valves and heat‑exchangers.​

---

Practical use for technicians and trainers

• Technicians can laminate similar tables and keep them in the toolbox or on the workshop wall as a quick‑reference during charging and troubleshooting.​
• Training centres and HVAC content creators like Mbsmgroup and Mbsm.pro can turn these values into interactive quizzes, infographics or mobile‑friendly charts for students and new technicians.​​

LG QP compressor

QP Series Rotary CompressorsIn Stock

50/60 Hz

Frequency	Voltage	Model	Cooling Capacity		Input	EER	COP
			Btu/hr	Watts	Watts	Btu/W.hr	W/W
60Hz	1Φ,208-230V	QP306K	22,600	6,623	2,055	11.00	3.22
60Hz	1Φ,208-230V	QP325K	24,000	7,033	2,162	11.10	3.25
60Hz	1Φ,208-230V	QP348K	25,900	7,590	2,312	11.20	3.28
60Hz	1Φ,208-230V	QP362K	27,000	7,912	2,455	11.00	3.22
60Hz	1Φ,208-230V	QP376K	27,700	8,117	2,541	10.90	3.19
60Hz	1Φ,208-230V	QP390K	29,200	8,557	2,646	11.04	3.23
60Hz	1Φ,208-230V	QP407K	30,100	8,821	2,736	11.00	3.22
60Hz	1Φ,208-230V	QP425K	31,900	9,348	2,929	10.89	3.19
50Hz	1Φ,220/240V	QP306P	18,450	5,407	1,650	11.18	3.28
50Hz	1Φ,220/240V	QP325P	19,500	5,714	1,773	11.00	3.22
50Hz	1Φ,220/240V	QP348P	20,500	6,007	1,884	10.88	3.19
50Hz	1Φ,220/240V	QP376P	22,500	6,593	2,030	11.08	3.25
50Hz	1Φ,220/240V	QP390P	23,500	6,886	2,080	11.30	3.31
50Hz	1Φ,220/240V	QP407P	24,400	7,150	2,180	11.19	3.28
50Hz	1Φ,220/240V	QP425P	25,600	7,502	2,335	10.96	3.21
50Hz	3Φ,380-420V	QP425Y	25,000	7,326	2,380	10.50	3.08

LG compressors QP306K
Voltage : 208-230 V/ 60 hz/ 1ph
EER: 11.00 W
Refrigerant : R410A
BTU : 22,600
COP : 3.22
Tecnology : On/Off
Motor type : Single
Weight 8,6 kg
Dimensions : 28 × 28 × 38 cm
Similar models : QP325K(24,000 btu), QP348K(25,900 btu), QP362K(27,000 btu), QP376K(27,700 btu), QP390K(29,200 btu), QP407K(30,100 btu), QP425K(31,900 btu), QP306P(18,450 btu), QP325P(19,500 btu), QP348P(20,500 btu), QP376P(22,500 btu), QP390P(23,500 btu), QP407P(24,400 btu), QP425P(25,600 btu), QP425Y(25,000 btu)

Tecumseh Compressor CAJ4461A

Product Description:

Type: Reciprocating Compressors

Application: HBP – High Back Pressure

ProductDescription: R-12

Voltage/Frequency: 220-240V ~ 50Hz

Version: N/A

Product Specifications

Performance:

Refrigeration Capacity

Input  Power

(E)Efficiency

EVAP TEMP

Condition

AMBIENT TEMP

RETURN GAS

LIQUID TEMP

Condition

Test  Voltage

(R)Btu/ h

(R)kcal/ h

(R) W

(I) W

(E)Btu/Wh

(E)kcal/ Wh

W/W

EN12900

220V ~ 50HZ

4629

1166

1356

657

7.04

1.77

2.06

5°C ( 41°F)

50°C  ( 122°F)

32°C ( 90°F)

20°C ( 68°F)

50°C  ( 122°F)

General

Evaporating Temp. Range: -15°C to 15°C (5°F to 59°F)

Motor Torque: High Start Torque (HST)

Compressor Cooling: Fan

Mechanical

Weight: 18

Weight Unit of Measure: KG

Displacement (cc): 18.3

Oil Type: Mineral

Viscosity(cSt): 68

Oil Charge (cc): 475

Electrical

Voltage Range (50 Hz): 198-253

Voltage Range (60 Hz):

Locked Rotor Amps (LRA): 20

Rated Load Amps (RLA 50 Hz): 3.8

Rated Load Amps (RLA 60 Hz): 0

Max. Continuous Current (MCCin Amps): 0

Motor Resistance (Ohm) – Main: 3.9

Motor Resistance (Ohm) – Start: 20.6

MotorType: CSIR

Tecumseh Reciprocating Compressor CAJ9510T-F1 F VATC

Tecumseh Reciprocating Compressor, 

1,Model :CAJ9510T-F1 F VATC,MBP/HBP 
2,Refrigerant: R22 
3,Voltage:220~240V/50HZ,1Hp 
4Datas as follow:

		Refrigeration Capacity			Input Power
Condition	Test Voltage	Btu/h	kcal/h	W	W
EN12900 ASERCOM	230V ~ 50HZ	4307	1085	1262	749

Efficiency			EVAP TEMP	COND TEMP	AMBIENT TEMP	RETURN GAS	LIQUID TEMP
Btu/Wh	kcal/Wh	W/W
5.75	1.45	1.68	-10°C (14°F)	45°C (113°F)	32°C (90°F)	0°C (32°F)	45°C (113°F)

Evaporating Temp. Range:	-23.3°C to 12.8°C (-10°F to 55°F)
Motor Torque:	High Start Torque (HST)
Compressor Cooling:	Fan

Weight:	22.922
Weight Unit of Measure:	N/A
Displacement (cc):	18.3
Oil Type:	Mineral
Viscosity (cSt):	68
Oil Charge (cc):	887
Sound Power dB(A):	N/A

Voltage Range (50 Hz):	198-253
Voltage Range (60 Hz):	N/A
Locked Rotor Amps (LRA):	29
Rated Load Amps (RLA 50 Hz):	4.7
Rated Load Amps (RLA 60 Hz):	4.7
Max. Continuous Current (MCC in Amps):	7.5
Motor Resitance (Ohm) – Main:	2.4
Motor Resitance (Ohm) – Start:	10.3
Motor Type:	CSR
Overload Type:	EXTERNAL
Relay Type:	Potential Relay

Specifications:
 
Tecumseh compressor:
 
Reciprocating for commercial and domestic refrigeration and air conditioning applications.
 
Rotary for air conditioning and commercial refrigeration applications.
 
We can supply more models as follow:

L’ UNITE HERMETIQUE  HERMETIC COMPRESSORS
MODEL	HP	TEMP	REFRIGERANT
AEZ2415Z	7/16	L	R404
CAE2417Z	7/16
CAE2420Z	1/2
CAE2424Z	5/8
CAJ2428Z	3/4
TAJ2428Z	3/4
CAJ2432Z	3/4
CAJ2440Z	1
CAJ2446Z	1
TAJ2446Z	1
CAJ2464Z	1-1/2
TAJ2464Z	1-1/2
CAJ2480Z	2
TAJ2480Z	2
FH2511Z	3
TFH2511Z	3
TAG/TAGP 2516Z	4
TAG/TAGP 2522Z	6
TAGD2532Z	8
TAGD2544Z	12
AEZ4440Z	1/3	M/H
AEZ9440Z	1/3
AE3450Z	3/7
CAE4450Z	3/7
CAE9450Z	3/7
CAE9460Z	1/2
CAE9470Z	9/16
CAJ9480Z	5/8
TAJ9480Z	5/8
CAJ9510Z	1
TAJ9510Z	1
CAJ9513Z	1-1/8
TAJ9513Z	1-1/8
CAJ4517Z	1-1/4
TAJ4517Z	1-1/4
CAJ4519Z	1-3/4
TAJ4519Z	1-3/4
FH4522Z	2
TFH4522Z	2
FH4524Z	2
TFH4524Z	2
FH4531Z	2-3/4
TFH4531Z	2-3/4
FH4540Z	3-1/2
TFH4540Z	3-1/2
AEZ4430Y	1/4	M/H	R134a
AE3440Y	1/3
CAE4440Y	1/3
CAE4448Y	3/7
CAE4456Y	7/16
CAJ4452Y	3/7
CAJ4461Y	1/2
TAJ4461Y	1/2
CAJ4476Y	5/8
CAJ4492Y	3/4
TAJ4492Y	3/4
CAJ4511Y	1
TAJ4511Y	1
FH4518Y	1-1/2
TFH4518Y	1-1/2
FH4525Y	2
TFH4525Y	2
CAE2417L	1/2	L	R502
CAJ2428L	5/8
TAJ2428L	5/8
CAJ2432L	3/4
CAJ2446L	1
TAJ2446L	1
CAJ2464L	1-1/2
TAJ2464L	1-1/2
TAH2480J	2
TAH2511K	3
TAHD2516J	4
TAHD2522K	6
TAG2516K	4
TAG2522K	6
AEZ4430E	1/4	M/H	R22
AEZ3430E	1/4
AEZ3440E	1/3
AEZ4440E	1/3
AEZ9440T	1/3
AE3450E	3/7
CAE4450E	3/7
CAE9450E	3/7
CAE9460E	1/2
CAJ9480T	5/8
TAJ9480T	5/8
CAJ9510T	1
TAJ9510T	1
CAJ9513T	1-1/8
TAJ9513T	1-1/8
CAJ4517E	1-1/4
CAJ4519T	1-3/4
TAJ4519T	1-3/4
FH4522F	2
TFH4522F	2
FH4524F	2
TFH4524F	2
FH4531F	2-3/4
TFH4531F	2-3/4
TFH4538E	3
TFH4540F	3-1/2
TAG/TAGP 4546T	4
TAG/TAGP 4553T	4-1/2
TAG/TAGP 4561T	5
TAG/TAGP 4568T	6
TAG/TAGP 4573T	6
TAGD4590T	7-1/2
TAGD4610T	9
TAGD4612T	10
TAGD4614T	12

NO	Model	Refrigerant	Horse Power
1	CAJ4461A-F1 G VA TC	R12	1/2 HP
2	CAJ4492A-F1 G VA TC	R12	3/4 HP
3	CAJ4511A-F1 G VA TC	R12	1 HP
4	CAE4440Y-F1 FTU	R134A	3/8 HP
5	CAE4456Y-F2 FTU	R134A	7/16 HP
6	CAJ4492Y-F1 TU	R134A	3/4 HP
7	CAJ4511Y-F1 F VA TC	R134A	1 HP
8	CAJ4461Y-F1 TU	R134A	1/2 HP
9	CAJ4511Y-F1 TU	R134A	1 HP
10	CAJ4476Y-F1 F TU	R134A	5/8 HP
11	CAJ4461Y-F1 F VA TC	R134A	1/2 HP
12	AEZ3440E-F2 FTU	R22	1/3 HP
13	CAE9460T-F2 FTU	R22	1/2 HP
14	AJ5510F-F1 F PSC TU	R22	3/4 HP
15	AJ5518E-F1 F CSR TU	R22	1-1/4 HP
16	CAE2420E-F2 GTU	R22	1/2 HP
17	CAJ9480T-F1 F VATC	R22	5/8 HP
18	CAJ9510T-F1 F VATC	R22	1 HP
19	CAJ9513T-F1 F VATC	R22	1-1/8 HP
20	CAJ9513T-F1 TU	R22	1-1/8 HP
21	CAJ4517E-F1 F VA TC	R22	1-1/4 HP
22	TAJ9510T-F1 F TU	R22	1 HP
23	CAJ4519T-F1 G VA TC	R22	1-3/4 HP
24	CAJ4519T-F1 G TU	R22	1-3/4 HP
25	CAJ2427E-F1 G TU	R22	3/4 HP
26	CAJ2439E-F1 G TU	R22	1 HP
27	TAJ9510T-F1 F VA TC	R22	1 HP
28	CAJ9480T-F1 F TU	R22	5/8 HP
29	CAJ9510T-F1 F TU	R22	1 HP
30	AJ5512E-F1 G PSC TU	R22	1 HP
31	AJ5515E-F1 G PSC TU	R22	1-1/4 HP
32	CAJ9510Z-F1 FTU	R404A	1HP
33	TAJ2446Z-F1TVATC	R404A	1HP
34	TAJ2464Z-F1 TTU	R404A	1.5HP
35	CAE2420Z-F2 FTU	R404A	1/2 HP
36	CAE2424Z-F2 FTU	R404A	5/8 HP
37	CAE9460Z-F2 FTU	R404A	1/2 HP
38	CAJ4519Z-F1 F VA TC	R404A	1-3/4 HP
39	CAJ2446Z-F1 F TU	R404A	1 HP
40	CAJ2464Z-F1 F VA TC	R404A	1-1/2 HP
41	CAJ2440Z-F1 F VA TC	R404A	1 HP
42	CAJ4517Z-F1 F TU	R404A	1-1/4 HP
43	CAJ4519Z-F1 F TU	R404A	1-3/4 HP
44	CAJ9510Z-F1 F VA TC	R404A	1 HP
45	CAJ9513Z-F1 F VA TC	R404A	1-1/8 HP
46	CAJ4517Z-F1 F VA TC	R404A	1-1/4 HP
47	CAJ9513Z-F1 F TU	R404A	1-1/8 HP
48	CAJ2428Z-F1 F TU	R404A	3/4 HP
49	CAJ2432Z-F1 F VA TC	R404A	3/4 HP
50	CAJ2446Z-F1 F VA TC	R404A	1 HP

Mbsm.pro, Fufw12caw-ag, air conditioner, Fresh, turbo, Cooling, heating, 12000 Btu, 1 ton, r410a, 850 grams

850 grams. The device is 12000, which means one ton of gas is 410. You have to make a vacuum before shipping, and the bottle must be inverted. Charge it according to the weight and the amp

• BRAND Fresh
• CAPACITY 1.5 HP
• COOLING TYPE cold and hot
• wall INSTALLATION
• MODEL FUFW12H

Diamond Inverter (R410a)
ASTW-HSDE-DC
Product Features:
T3 Tropical inverter compressor
Fast cooling within 30 seconds
Gold and blue fins on all indoor and outdoor condensers and evaporators
IClean – Self-cleaning for indoor unit
Auto-restart
ASTW-H12SDE-22 (1 Ton)
ASTW-H18SDE-22 (1.5 Tons)
ASTW-H24SDE-22 (2 Tons)

Features

Model	VRV System v6 GMV-615WM/G-X Airflow rate: 10500 m3 /h
H/p	22 Hp
Served area, m2	600
Power supply, f/Hz/V	3/50;60/380-415
Refrigerant type	R410A / 8300 G
Noise level of the outdoor unit (min/max), dB	63
External block weight, kg	350
Outdoor unit dimensions (WxHxD), cm	134x169x77.5
Tubing diameter (liquid), mm (in)	ф15,9
Tubing diameter (gas), mm (in)	ф28,6
Guaranteed outdoor temperature range (cooling), °С	-5…+52
Guaranteed outdoor temperature range (heating), °C	-30…+24
Air conditioner type	VRF system
Power in heating mode, kW	69
Power consumption during cooling, kW	16.2
Power consumption during heating, kW	16.9
Inverter	There is
Cooling capacity (BTU)	Cooling capacity: 210000 btu / 17.5 Ton Heating capacity: 235000 btu / 19.5 Ton
Main Modes	Cooling / heating
Power in cooling mode, kW	61.5

PH	1 PH
Hp	1 Hp
Refrigerant:	R410A
Displacement:	36 Cm3/Rev
Capacity:	10098BTU/H
Power Input:	945W