Mbsm.pro, Compressor, KX69LBEG, 1/5 hp, LG Electronics, R134a, 150 W, 1Ph, 220-240V 50Hz, LBP, Reciprocating, -35°C to -10°C, Refrigerator

Technical Specifications Table

Compressor Cross-Reference (Same Gas – R134a)

1. Danfoss/Secop: TLS7F
2. Embraco: EMI60HER / NEK1116Z
3. Tecumseh: THG1365YS
4. Samsung: SD162
5. ACC/Sikor: GVY66AA

Compressor Cross-Reference (Alternative Gas – R600a)

1. LG: MSA69LBEG (R600a version)
2. Embraco: EMX55CLC
3. Danfoss: TLES5.7KK.3
4. Secop: NLE6.0KK
5. Jiaxipera: T1112GY

Mastering the LG KX69LBEG: The Heart of Modern Domestic Refrigeration

When a refrigerator fails, the culprit is often the compressor—the mechanical heart that pumps life into the cooling cycle. Among the most reliable workhorses found in household units is the LG KX69LBEG. This 1/5 HP reciprocating compressor is engineered specifically for Low Back Pressure (LBP) applications, making it the ideal candidate for freezers and standard kitchen refrigerators that need to maintain consistent sub-zero temperatures.

Performance Dynamics

The KX69LBEG operates on a displacement of 6.9cc. Unlike larger commercial units that rely on high-torque start capacitors, this model utilizes an RSIR motor configuration. This means it is highly efficient for domestic settings where power stability is standard, drawing approximately 150 Watts during its peak cooling phase. Its thermally protected design ensures that even during high-ambient summer temperatures, the internal windings remain shielded from catastrophic failure.

Comparative Analysis: LG vs. The Competition

In the world of 1/5 HP compressors, the KX69LBEG stands out for its low vibration and silent operation. Compared to the Danfoss TLS7F, the LG model often provides a more compact footprint, which is essential for modern “slim-back” refrigerator designs. While the Embraco NEK1116Z might offer a slightly higher BTU output, the LG KX69LBEG is prized for its longevity and “copper-heavy” winding durability.

Engineering Insights and Installation Tips

• System Cleansing: When replacing a burnt-out KX69LBEG, always flush the condenser and evaporator. Residual acidity from a motor burnout will destroy the new unit.
• Filter Drier: Never reuse a filter drier. Always install a new 15g or 20g XH-9 molecular sieve drier to handle the R134a refrigerant.
• Vacuuming: Ensure a vacuum level of at least 500 microns. R134a is highly sensitive to moisture, which can lead to capillary tube waxing and blockage.

Engineer’s Note: If you are substituting this model with an R600a alternative, you MUST change the expansion device (capillary) and the lubricant. Mixing R134a and R600a systems without proper modification is a recipe for system failure.

Focus Keyphrase: LG KX69LBEG Compressor 1/5 HP R134a Technical Specs

SEO Title: Mbsm.pro – LG KX69LBEG Compressor: 1/5 HP, R134a, LBP Technical Guide

Meta Description: Discover the complete technical specifications for the LG KX69LBEG compressor. This 1/5 HP R134a unit is perfect for domestic refrigerators. Learn about its cooling capacity, amperage, and the best 5 replacements for easy repairs.

Slug: lg-kx69lbeg-compressor-1-5hp-r134a-specifications

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, LG, KX69LBEG, 1/5 HP, R134a, LBP, Compressor Replacement, TLS7F, EMI60HER, THG1365YS, SD162, GVY66AA, EMX55CLC, TLES5.7KK, Refrigeration Repair.

Excerpt: The LG KX69LBEG is a high-performance 1/5 HP reciprocating compressor designed for Low Back Pressure (LBP) domestic refrigeration. Operating on R134a refrigerant at 220-240V/50Hz, this thermally protected unit is the standard for LG’s cooling reliability. In this guide, we break down its displacement, amperage, and provide a comprehensive list of equivalent replacement models.

Mbsm.pro, Compressor, KX69LBEG, 1/5 hp, LG Electronics, R134a, 150 W, 1Ph, 220-240V 50Hz, LBP, Reciprocating, -35°C to -10°C, Refrigerator

Technical Specifications Table

Compressor Cross-Reference (Same Gas – R134a)

1. Danfoss/Secop: TLS7F
2. Embraco: EMI60HER / NEK1116Z
3. Tecumseh: THG1365YS
4. Samsung: SD162
5. ACC/Sikor: GVY66AA

Compressor Cross-Reference (Alternative Gas – R600a)

1. LG: MSA69LBEG (R600a version)
2. Embraco: EMX55CLC
3. Danfoss: TLES5.7KK.3
4. Secop: NLE6.0KK
5. Jiaxipera: T1112GY

Mastering the LG KX69LBEG: The Heart of Modern Domestic Refrigeration

When a refrigerator fails, the culprit is often the compressor—the mechanical heart that pumps life into the cooling cycle. Among the most reliable workhorses found in household units is the LG KX69LBEG. This 1/5 HP reciprocating compressor is engineered specifically for Low Back Pressure (LBP) applications, making it the ideal candidate for freezers and standard kitchen refrigerators that need to maintain consistent sub-zero temperatures.

Performance Dynamics

The KX69LBEG operates on a displacement of 6.9cc. Unlike larger commercial units that rely on high-torque start capacitors, this model utilizes an RSIR motor configuration. This means it is highly efficient for domestic settings where power stability is standard, drawing approximately 150 Watts during its peak cooling phase. Its thermally protected design ensures that even during high-ambient summer temperatures, the internal windings remain shielded from catastrophic failure.

Comparative Analysis: LG vs. The Competition

In the world of 1/5 HP compressors, the KX69LBEG stands out for its low vibration and silent operation. Compared to the Danfoss TLS7F, the LG model often provides a more compact footprint, which is essential for modern “slim-back” refrigerator designs. While the Embraco NEK1116Z might offer a slightly higher BTU output, the LG KX69LBEG is prized for its longevity and “copper-heavy” winding durability.

Engineering Insights and Installation Tips

• System Cleansing: When replacing a burnt-out KX69LBEG, always flush the condenser and evaporator. Residual acidity from a motor burnout will destroy the new unit.
• Filter Drier: Never reuse a filter drier. Always install a new 15g or 20g XH-9 molecular sieve drier to handle the R134a refrigerant.
• Vacuuming: Ensure a vacuum level of at least 500 microns. R134a is highly sensitive to moisture, which can lead to capillary tube waxing and blockage.

Engineer’s Note: If you are substituting this model with an R600a alternative, you MUST change the expansion device (capillary) and the lubricant. Mixing R134a and R600a systems without proper modification is a recipe for system failure.

Focus Keyphrase: LG KX69LBEG Compressor 1/5 HP R134a Technical Specs

SEO Title: Mbsm.pro – LG KX69LBEG Compressor: 1/5 HP, R134a, LBP Technical Guide

Meta Description: Discover the complete technical specifications for the LG KX69LBEG compressor. This 1/5 HP R134a unit is perfect for domestic refrigerators. Learn about its cooling capacity, amperage, and the best 5 replacements for easy repairs.

Slug: lg-kx69lbeg-compressor-1-5hp-r134a-specifications

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, LG, KX69LBEG, 1/5 HP, R134a, LBP, Compressor Replacement, TLS7F, EMI60HER, THG1365YS, SD162, GVY66AA, EMX55CLC, TLES5.7KK, Refrigeration Repair.

Excerpt: The LG KX69LBEG is a high-performance 1/5 HP reciprocating compressor designed for Low Back Pressure (LBP) domestic refrigeration. Operating on R134a refrigerant at 220-240V/50Hz, this thermally protected unit is the standard for LG’s cooling reliability. In this guide, we break down its displacement, amperage, and provide a comprehensive list of equivalent replacement models.

Focus Keyphrase: Donper S118CY1 Compressor R600a 1/4 HP LBP Refrigeration Specifications and Replacement Guide for Technicians and Engineers

SEO Title: Mbsmpro.com, Donper, S118CY1, Compressor, 1/4 HP, LBP, R600a, 210 W, 1Ph 220-240V 50Hz, Freezing and Cooling

Meta Description: Detailed technical analysis of the Donper S118CY1 compressor. Includes 1/4 HP power rating, R600a refrigerant specs, LBP application data, and equivalent replacement models for professional repair.

Slug: donper-s118cy1-compressor-r600a-1-4-hp-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Donper, S118CY1, R600a, Compressor, 1/4 HP, LBP, Refrigeration, Embraco EMX70CLC, Secop NLY90R, Jiaxipera NT1114Y, Huayi HYE11YG, Cubigel GL90AA

Excerpt: The Donper S118CY1 compressor is a cornerstone of modern domestic refrigeration, engineered for high efficiency in Low Back Pressure (LBP) environments. Utilizing R600a refrigerant, this 1/4 HP unit provides reliable cooling for large household refrigerators and freezers. This guide explores its technical parameters, electrical requirements, and the best cross-reference alternatives for field technicians.

Mbsmpro.com, Donper, S118CY1, Compressor, 1/4 HP, LBP, R600a, 210 W, 1.1 A, 1Ph 220-240V 50Hz, Cooling and Freezing

In the realm of hermetic refrigeration, the Donper S series has established a reputation for balancing cost-effectiveness with thermal durability. The S118CY1 model, specifically designed for R600a (isobutane) systems, represents a shift toward environmentally friendly refrigerants with low Global Warming Potential (GWP). As an engineer working in the field, understanding the nuances of this compressor is vital for ensuring system longevity and optimal thermodynamic performance.

Engineering Overview: The S118CY1 Architecture

The S118CY1 is a reciprocating piston compressor designed for Low Back Pressure (LBP) applications. This means it is optimized to operate at low evaporating temperatures, typically between -35°C and -15°C, making it the ideal “heart” for chest freezers and the freezer compartments of large side-by-side refrigerators. With a displacement of approximately 11.8 cm³, it delivers a cooling capacity that sits comfortably in the 1/4 HP category.

One of the defining features of this model is its thermal protection system. In high-ambient environments, compressors often face the risk of winding burnout. The S118CY1 incorporates an internal or external thermal protector that interrupts power if the internal temperature exceeds safety thresholds, a critical fail-safe for residential appliances.

Technical Specifications Table

Performance Comparison: R600a vs. R134a

When comparing the S118CY1 to its R134a counterparts (like the QD series), the thermodynamic efficiency of R600a becomes evident. R600a operates at lower pressures, which reduces the mechanical stress on the compressor valves and pistons. However, because R600a is flammable, the S118CY1 is built with “thermally protected” electrical components to prevent sparking in the event of a leak.

Cross-Reference and Replacement Guide

When a S118CY1 fails, finding an exact match is preferred, but field technicians often need equivalents based on local availability.

Top 5 Replacements (Same Refrigerant: R600a)

1. Embraco EMX70CLC: Known for extremely low noise levels and high COP.
2. Secop (Danfoss) NLY9.0R: A robust European alternative with excellent thermal management.
3. Jiaxipera NT1114Y: Widely used in high-end Samsung and LG units.
4. Huayi HYE11YG: A direct competitor with similar displacement and mounting footprints.
5. Sikolan ADW110: A reliable alternative for budget-friendly repairs.

Top 5 Replacements (Alternative Refrigerant: R134a)
Note: Replacing an R600a compressor with an R134a unit requires a complete system flush, oil compatibility check, and capillary tube adjustment.

1. Donper QD110: The R134a sibling to the S118 series.
2. Embraco GL90AA: A classic 1/4 HP+ LBP workhorse.
3. Secop TLY8.7KK: High-efficiency R134a unit.
4. ZMC GQR12AA: High displacement for heavy-duty cooling.
5. Tecumseh THG1374YS: American standard for 1/4 HP refrigeration.

Expert Field Advice and Notices

• Notice on R600a Safety: Always use a vacuum pump and charging station rated for flammable gases. Never use a torch (brazing) near an open R600a system; use Lokring fittings if possible or ensure the system is completely purged with Nitrogen.
• Capillary Maintenance: When replacing the S118CY1, always replace the filter drier. A clogged drier is the leading cause of premature compressor failure in R600a systems due to the formation of paraffin waxes at low temperatures.
• Winding Integrity: If you suspect a motor failure, check the resistance between the Common, Start, and Run pins. A healthy S118CY1 should show consistent readings without a “short to ground.”
• Mounting: Ensure the rubber grommets are in good condition. The S118CY1’s 11.8cc displacement creates specific harmonic vibrations that must be dampened to prevent copper pipe fatigue.

Benefit for the User

Choosing or replacing the Donper S118CY1 correctly ensures that the appliance maintains its energy rating. Using an undersized compressor will lead to “short-cycling” and high energy bills, while an oversized unit can cause evaporator icing. Following the 1/4 HP LBP specification ensures the evaporator remains at the precise delta-T required for food safety.

Focus Keyphrase: Donper S118CY1 Compressor R600a 1/4 HP LBP Refrigeration Specifications and Replacement Guide for Technicians and Engineers

SEO Title: Mbsmpro.com, Donper, S118CY1, Compressor, 1/4 HP, LBP, R600a, 210 W, 1Ph 220-240V 50Hz, Freezing and Cooling

Meta Description: Detailed technical analysis of the Donper S118CY1 compressor. Includes 1/4 HP power rating, R600a refrigerant specs, LBP application data, and equivalent replacement models for professional repair.

Slug: donper-s118cy1-compressor-r600a-1-4-hp-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Donper, S118CY1, R600a, Compressor, 1/4 HP, LBP, Refrigeration, Embraco EMX70CLC, Secop NLY90R, Jiaxipera NT1114Y, Huayi HYE11YG, Cubigel GL90AA

Excerpt: The Donper S118CY1 compressor is a cornerstone of modern domestic refrigeration, engineered for high efficiency in Low Back Pressure (LBP) environments. Utilizing R600a refrigerant, this 1/4 HP unit provides reliable cooling for large household refrigerators and freezers. This guide explores its technical parameters, electrical requirements, and the best cross-reference alternatives for field technicians.

Mbsmpro.com, Donper, S118CY1, Compressor, 1/4 HP, LBP, R600a, 210 W, 1.1 A, 1Ph 220-240V 50Hz, Cooling and Freezing

In the realm of hermetic refrigeration, the Donper S series has established a reputation for balancing cost-effectiveness with thermal durability. The S118CY1 model, specifically designed for R600a (isobutane) systems, represents a shift toward environmentally friendly refrigerants with low Global Warming Potential (GWP). As an engineer working in the field, understanding the nuances of this compressor is vital for ensuring system longevity and optimal thermodynamic performance.

Engineering Overview: The S118CY1 Architecture

The S118CY1 is a reciprocating piston compressor designed for Low Back Pressure (LBP) applications. This means it is optimized to operate at low evaporating temperatures, typically between -35°C and -15°C, making it the ideal “heart” for chest freezers and the freezer compartments of large side-by-side refrigerators. With a displacement of approximately 11.8 cm³, it delivers a cooling capacity that sits comfortably in the 1/4 HP category.

One of the defining features of this model is its thermal protection system. In high-ambient environments, compressors often face the risk of winding burnout. The S118CY1 incorporates an internal or external thermal protector that interrupts power if the internal temperature exceeds safety thresholds, a critical fail-safe for residential appliances.

Technical Specifications Table

Performance Comparison: R600a vs. R134a

When comparing the S118CY1 to its R134a counterparts (like the QD series), the thermodynamic efficiency of R600a becomes evident. R600a operates at lower pressures, which reduces the mechanical stress on the compressor valves and pistons. However, because R600a is flammable, the S118CY1 is built with “thermally protected” electrical components to prevent sparking in the event of a leak.

Cross-Reference and Replacement Guide

When a S118CY1 fails, finding an exact match is preferred, but field technicians often need equivalents based on local availability.

Top 5 Replacements (Same Refrigerant: R600a)

1. Embraco EMX70CLC: Known for extremely low noise levels and high COP.
2. Secop (Danfoss) NLY9.0R: A robust European alternative with excellent thermal management.
3. Jiaxipera NT1114Y: Widely used in high-end Samsung and LG units.
4. Huayi HYE11YG: A direct competitor with similar displacement and mounting footprints.
5. Sikolan ADW110: A reliable alternative for budget-friendly repairs.

Top 5 Replacements (Alternative Refrigerant: R134a)
Note: Replacing an R600a compressor with an R134a unit requires a complete system flush, oil compatibility check, and capillary tube adjustment.

1. Donper QD110: The R134a sibling to the S118 series.
2. Embraco GL90AA: A classic 1/4 HP+ LBP workhorse.
3. Secop TLY8.7KK: High-efficiency R134a unit.
4. ZMC GQR12AA: High displacement for heavy-duty cooling.
5. Tecumseh THG1374YS: American standard for 1/4 HP refrigeration.

Expert Field Advice and Notices

• Notice on R600a Safety: Always use a vacuum pump and charging station rated for flammable gases. Never use a torch (brazing) near an open R600a system; use Lokring fittings if possible or ensure the system is completely purged with Nitrogen.
• Capillary Maintenance: When replacing the S118CY1, always replace the filter drier. A clogged drier is the leading cause of premature compressor failure in R600a systems due to the formation of paraffin waxes at low temperatures.
• Winding Integrity: If you suspect a motor failure, check the resistance between the Common, Start, and Run pins. A healthy S118CY1 should show consistent readings without a “short to ground.”
• Mounting: Ensure the rubber grommets are in good condition. The S118CY1’s 11.8cc displacement creates specific harmonic vibrations that must be dampened to prevent copper pipe fatigue.

Benefit for the User

Choosing or replacing the Donper S118CY1 correctly ensures that the appliance maintains its energy rating. Using an undersized compressor will lead to “short-cycling” and high energy bills, while an oversized unit can cause evaporator icing. Following the 1/4 HP LBP specification ensures the evaporator remains at the precise delta-T required for food safety.

Based on the data provided in the nameplate, the refrigerator requires exactly 13 grams of R600a refrigerant.

Technical Specification Table

Compressor Replacements

5 Replacements (Same Gas – R600a):

• Jiaxipera T1110Y
• Danfoss/Secop TLES4KK.3
• Embraco EMX20CLC
• Huayi B43H
• Wanbao ASD43Y

5 Replacements (Other Gas – R134a – Requires Flushing):

• Embraco EMI 30HER
• Jiaxipera ZBS1111cy
• Danfoss TLS3F
• Donper S43CZ
• Cubigel GL45AA

Mbsmpro.com, White Point, WPMR91S, Refrigerator, 1/12 hp, R600a, 13g, 0.50 A, 220-240V 50Hz, LBP, Made in Turkey

The White Point WPMR91S represents the modern standard for compact, energy-efficient refrigeration. Manufactured in Turkey, this unit is specifically designed for domestic cooling applications, utilizing the thermodynamic advantages of R600a (Isobutane). Unlike older systems that used heavy refrigerant loads, this high-efficiency cycle operates with a precision charge of only 13 grams.

Thermodynamics and Efficiency

The WPMR91S is built around a Low Back Pressure (LBP) cycle. With a rated current of 0.50 Amperes, the electrical footprint is remarkably low. The integration of R600a allows the compressor to operate at lower pressures compared to R134a, which reduces mechanical wear on the piston and valves, extending the lifespan of the motor.

Engineering Comparison: R600a vs. R134a

Professional Maintenance Notice

As an expert in the field, I must emphasize that when servicing the WPMR91S, the 13g charge is critical. Because the volume is so small, traditional manifold gauges can trap a significant percentage of the gas in the hoses.

• Scale Precision: Use a digital scale accurate to 1 gram.
• Vacuum: A deep vacuum is mandatory as R600a systems are highly sensitive to moisture and non-condensables.
• Safety: R600a is flammable. Ensure no open flames or sparks are present during the charging process.

Benefits for the End User

The primary benefit of this specific engineering setup is the Isolation Degree IPX4, which provides protection against moisture ingress, making it ideal for various climates. The use of a PTC relay instead of a mechanical start relay further reduces the “click” noise during startup, providing a quieter user experience.

Focus Keyphrase: White Point WPMR91S Refrigerator R600a 13g Compressor

SEO Title: Mbsmpro.com | White Point WPMR91S Specs | R600a 13g Refrigerator Guide

Meta Description: Full technical data for White Point WPMR91S. Features 13g R600a refrigerant, 0.50A current, and 1/12 HP compressor details. Expert guide for replacement and repair.

Slug: white-point-wpmr91s-refrigerator-specs-r600a-13g

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, White Point, WPMR91S, R600a, Compressor Replacement, Jiaxipera T1110Y, Danfoss TLES4KK.3, Embraco EMX20CLC, Refrigerator Repair Turkey, 1/12 HP Compressor

Excerpt: The White Point WPMR91S is a high-efficiency 91-liter refrigerator utilizing a specialized 13-gram R600a refrigerant charge. Operating at 0.50A, this Turkish-made unit is designed for optimal LBP performance. This guide provides comprehensive technical specifications, compressor cross-references, and engineering insights for professional technicians and hobbyists looking for reliable maintenance data and replacement parts.

Based on the data provided in the nameplate, the refrigerator requires exactly 13 grams of R600a refrigerant.

Technical Specification Table

Compressor Replacements

5 Replacements (Same Gas – R600a):

• Jiaxipera T1110Y
• Danfoss/Secop TLES4KK.3
• Embraco EMX20CLC
• Huayi B43H
• Wanbao ASD43Y

5 Replacements (Other Gas – R134a – Requires Flushing):

• Embraco EMI 30HER
• Jiaxipera ZBS1111cy
• Danfoss TLS3F
• Donper S43CZ
• Cubigel GL45AA

Mbsmpro.com, White Point, WPMR91S, Refrigerator, 1/12 hp, R600a, 13g, 0.50 A, 220-240V 50Hz, LBP, Made in Turkey

The White Point WPMR91S represents the modern standard for compact, energy-efficient refrigeration. Manufactured in Turkey, this unit is specifically designed for domestic cooling applications, utilizing the thermodynamic advantages of R600a (Isobutane). Unlike older systems that used heavy refrigerant loads, this high-efficiency cycle operates with a precision charge of only 13 grams.

Thermodynamics and Efficiency

The WPMR91S is built around a Low Back Pressure (LBP) cycle. With a rated current of 0.50 Amperes, the electrical footprint is remarkably low. The integration of R600a allows the compressor to operate at lower pressures compared to R134a, which reduces mechanical wear on the piston and valves, extending the lifespan of the motor.

Engineering Comparison: R600a vs. R134a

Professional Maintenance Notice

As an expert in the field, I must emphasize that when servicing the WPMR91S, the 13g charge is critical. Because the volume is so small, traditional manifold gauges can trap a significant percentage of the gas in the hoses.

• Scale Precision: Use a digital scale accurate to 1 gram.
• Vacuum: A deep vacuum is mandatory as R600a systems are highly sensitive to moisture and non-condensables.
• Safety: R600a is flammable. Ensure no open flames or sparks are present during the charging process.

Benefits for the End User

The primary benefit of this specific engineering setup is the Isolation Degree IPX4, which provides protection against moisture ingress, making it ideal for various climates. The use of a PTC relay instead of a mechanical start relay further reduces the “click” noise during startup, providing a quieter user experience.

Focus Keyphrase: White Point WPMR91S Refrigerator R600a 13g Compressor

SEO Title: Mbsmpro.com | White Point WPMR91S Specs | R600a 13g Refrigerator Guide

Meta Description: Full technical data for White Point WPMR91S. Features 13g R600a refrigerant, 0.50A current, and 1/12 HP compressor details. Expert guide for replacement and repair.

Slug: white-point-wpmr91s-refrigerator-specs-r600a-13g

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, White Point, WPMR91S, R600a, Compressor Replacement, Jiaxipera T1110Y, Danfoss TLES4KK.3, Embraco EMX20CLC, Refrigerator Repair Turkey, 1/12 HP Compressor

Excerpt: The White Point WPMR91S is a high-efficiency 91-liter refrigerator utilizing a specialized 13-gram R600a refrigerant charge. Operating at 0.50A, this Turkish-made unit is designed for optimal LBP performance. This guide provides comprehensive technical specifications, compressor cross-references, and engineering insights for professional technicians and hobbyists looking for reliable maintenance data and replacement parts.

Based on the technical data provided for the Evvoli air conditioning unit, here is the professional breakdown, technical table, and SEO-optimized article.

Gas Charge Calculation

To find the precise weight of the refrigerant, we use the Global Warming Potential ($GWP$) formula provided on the label:

The gas charge weight is approximately 1.80 kg (1800 grams).

Technical Specifications Table

5 Compressor replacements (Same Gas: R410A)

1. GMCC PA240X2C-4FT
2. Highly ASD225RK-PA6AG
3. Panasonic 5PS225DAB02
4. Rechi 44R423A
5. LG GP250P

5 Compressor replacements (Other Gas: R22 Compatibility)

Note: Requires flushing system and changing oil/capillary.

1. Panasonic 2K32C225
2. GMCC PH370G2C
3. Copeland ZR28K3-PFV
4. Tecumseh AW5524E
5. Mitsubishi KH197

Mbsmpro.com, Compressor, EVCIS-24K-MD, 2.5 hp, Evvoli, Cooling, R410A, 24000 BTU, 20.0A, 1Ph 220-240V 50Hz, HBP

The Evvoli EVCIS-24K-MD is a high-performance rotary compressor system specifically engineered for split-type air conditioners. Delivering a powerful 24,000 BTU cooling capacity, this unit is built to withstand extreme operating pressures, reaching up to 4.2MPa on the discharge side. Utilizing R410A refrigerant, it meets modern environmental standards while providing superior heat transfer compared to legacy R22 systems.

Performance Dynamics and Comparison

When comparing the EVCIS-24K-MD to standard 18,000 BTU units, the power jump is significant. While an 18K unit typically draws 12-14 Amps, this 24K beast requires a stable 20.0A feed. This makes it ideal for large living spaces or small commercial offices where consistent cooling (and heating at 26,000 BTU) is non-negotiable.

Expert Engineering Insights

• Thermal Efficiency: The unit features an IPX4 resistance class, meaning the outdoor electrical components are protected against splashing water from any direction, crucial for rainy or humid climates.
• Installation Note: Vacuuming the system is not optional. Moisture in an R410A system reacts with POE oil to form acid, which will eventually eat through the copper windings.
• Protection: Due to the 20A draw, ensure the use of a dedicated circuit breaker.

Focus Keyphrase: Evvoli EVCIS-24K-MD 24000 BTU R410A Compressor Specifications

SEO Title: Mbsmpro.com, Evvoli EVCIS-24K-MD, 2.5 hp, 24000 BTU, R410A, 220V Technical Data

Meta Description: Full technical specs for Evvoli EVCIS-24K-MD Split AC. 24,000 BTU, R410A gas (1.8kg), 20A current. Includes compressor replacements (GMCC, Panasonic, LG) and wiring insights.

Slug: evvoli-evcis-24k-md-compressor-specs-r410a

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Evvoli, EVCIS-24K-MD, R410A, 24000 BTU, 2.5 HP, GMCC PA240X2C, Highly ASD225RK, Panasonic 5PS225, Rechi 44R423A, LG GP250P, Split AC Repair, HVAC Engineering.

Excerpt: The Evvoli EVCIS-24K-MD is a robust 2.5 HP rotary compressor designed for 24,000 BTU split-type air conditioners. Running on R410A refrigerant with a 20.0A rated current, it offers high-efficiency cooling and heating (26,000 BTU). This technical guide explores its pressure limits, electrical requirements, and the best replacement compressors for HVAC professionals and field workers.

Based on the technical data provided for the Evvoli air conditioning unit, here is the professional breakdown, technical table, and SEO-optimized article.

Gas Charge Calculation

To find the precise weight of the refrigerant, we use the Global Warming Potential ($GWP$) formula provided on the label:

The gas charge weight is approximately 1.80 kg (1800 grams).

Technical Specifications Table

5 Compressor replacements (Same Gas: R410A)

1. GMCC PA240X2C-4FT
2. Highly ASD225RK-PA6AG
3. Panasonic 5PS225DAB02
4. Rechi 44R423A
5. LG GP250P

5 Compressor replacements (Other Gas: R22 Compatibility)

Note: Requires flushing system and changing oil/capillary.

1. Panasonic 2K32C225
2. GMCC PH370G2C
3. Copeland ZR28K3-PFV
4. Tecumseh AW5524E
5. Mitsubishi KH197

Mbsmpro.com, Compressor, EVCIS-24K-MD, 2.5 hp, Evvoli, Cooling, R410A, 24000 BTU, 20.0A, 1Ph 220-240V 50Hz, HBP

The Evvoli EVCIS-24K-MD is a high-performance rotary compressor system specifically engineered for split-type air conditioners. Delivering a powerful 24,000 BTU cooling capacity, this unit is built to withstand extreme operating pressures, reaching up to 4.2MPa on the discharge side. Utilizing R410A refrigerant, it meets modern environmental standards while providing superior heat transfer compared to legacy R22 systems.

Performance Dynamics and Comparison

When comparing the EVCIS-24K-MD to standard 18,000 BTU units, the power jump is significant. While an 18K unit typically draws 12-14 Amps, this 24K beast requires a stable 20.0A feed. This makes it ideal for large living spaces or small commercial offices where consistent cooling (and heating at 26,000 BTU) is non-negotiable.

Expert Engineering Insights

• Thermal Efficiency: The unit features an IPX4 resistance class, meaning the outdoor electrical components are protected against splashing water from any direction, crucial for rainy or humid climates.
• Installation Note: Vacuuming the system is not optional. Moisture in an R410A system reacts with POE oil to form acid, which will eventually eat through the copper windings.
• Protection: Due to the 20A draw, ensure the use of a dedicated circuit breaker.

Focus Keyphrase: Evvoli EVCIS-24K-MD 24000 BTU R410A Compressor Specifications

SEO Title: Mbsmpro.com, Evvoli EVCIS-24K-MD, 2.5 hp, 24000 BTU, R410A, 220V Technical Data

Meta Description: Full technical specs for Evvoli EVCIS-24K-MD Split AC. 24,000 BTU, R410A gas (1.8kg), 20A current. Includes compressor replacements (GMCC, Panasonic, LG) and wiring insights.

Slug: evvoli-evcis-24k-md-compressor-specs-r410a

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Evvoli, EVCIS-24K-MD, R410A, 24000 BTU, 2.5 HP, GMCC PA240X2C, Highly ASD225RK, Panasonic 5PS225, Rechi 44R423A, LG GP250P, Split AC Repair, HVAC Engineering.

Excerpt: The Evvoli EVCIS-24K-MD is a robust 2.5 HP rotary compressor designed for 24,000 BTU split-type air conditioners. Running on R410A refrigerant with a 20.0A rated current, it offers high-efficiency cooling and heating (26,000 BTU). This technical guide explores its pressure limits, electrical requirements, and the best replacement compressors for HVAC professionals and field workers.

Yes, this compressor (ZMC EGM66AF) is an excellent fit for a 10-foot refrigerator. It is rated at approximately 1/6 HP, which is the industry standard for domestic fridges in the 10 to 12-foot range.

Mbsmpro.com, Compressor, EGM66AF, 1/6 hp, ZMC, Cooling, R134a, 150 W, 1.1 A, 1Ph 220-240V 50Hz, LBP

Compressor Replacement Options

5 Replacements (Same Gas – R134a):

1. Embraco: EMY65HLC / EMI 70HER
2. Danfoss/Secop: TLS6F
3. Panasonic: QB66C13GAX5
4. Tecumseh: THG1352YGS
5. Huayi: HYE69MTU

5 Replacements (Other Gas – R600a):

Note: Requires full system flush and oil change consideration.

1. ZMC: EGM66AA
2. Embraco: EMX55CLC
3. Secop: TLES6.5KK.3
4. Donper: L72CZ1
5. Jiaxipera: T1114Y

The Engineering Guide to ZMC EGM66AF Performance

In the demanding world of residential cooling, the compressor serves as the mechanical heart of the appliance. The ZMC EGM66AF stands out as a robust 1/6 HP unit, specifically engineered for Low Back Pressure (LBP) applications. This model is a favorite among field engineers due to its Egyptian-made reliability, combining European design standards with local durability.

Technical Efficiency & Motor Design

The EGM66AF utilizes an RSIR motor (Resistive Start, Induction Run). Unlike many modern low-power compressors that use aluminum windings to shave weight, ZMC continues to utilize high-purity copper. This ensures better heat dissipation and reduces the risk of winding burnout during high-ambient-temperature summers.

Comparative Value Analysis

When compared to its peers, the EGM66AF offers a balanced displacement-to-power ratio:

Professional Field Advice & Benefits

• Optimal Environment: This compressor is designed for static cooling. Do not install it in commercial cabinets that require forced-air fan cooling unless the airflow is specifically directed at the compressor body to prevent overheating.
• Vacuum Protocol: R134a systems use POE oil, which is highly sensitive to moisture. A minimum vacuum of 500 microns is essential to prevent “acid” formation inside the capillary tube.
• Filter Drier: Always replace the filter drier when installing a new EGM66AF. A 15g or 20g drier is sufficient for a 10-foot refrigerator setup.

SEO Metadata

• Focus Keyphrase: ZMC EGM66AF Refrigerator Compressor 1/6 HP
• SEO Title: Mbsmpro.com | ZMC EGM66AF Compressor Specs | 1/6 HP R134a Technical Data
• Meta Description: Detailed technical specifications for the ZMC EGM66AF compressor. Ideal for 10-12 feet refrigerators using R134a. Find HP, cooling capacity, and 10 cross-replacement models.
• Slug: zmc-egm66af-1-6-hp-compressor-specs
• Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, ZMC, EGM66AF, R134a, 1/6 HP, Refrigerator Repair, Compressor Replacement, Danfoss TLS6F, Embraco EMY65HLC, Panasonic QB66C, Cooling Technology.

Excerpt

The ZMC EGM66AF is a high-reliability 1/6 HP compressor designed for Low Back Pressure (LBP) applications in domestic refrigerators ranging from 10 to 12 feet. Utilizing R134a refrigerant and a 6.66cc displacement, this unit features durable copper windings and an RSIR motor, making it a preferred choice for technicians seeking longevity and efficiency.

Yes, this compressor (ZMC EGM66AF) is an excellent fit for a 10-foot refrigerator. It is rated at approximately 1/6 HP, which is the industry standard for domestic fridges in the 10 to 12-foot range.

Mbsmpro.com, Compressor, EGM66AF, 1/6 hp, ZMC, Cooling, R134a, 150 W, 1.1 A, 1Ph 220-240V 50Hz, LBP

Compressor Replacement Options

5 Replacements (Same Gas – R134a):

1. Embraco: EMY65HLC / EMI 70HER
2. Danfoss/Secop: TLS6F
3. Panasonic: QB66C13GAX5
4. Tecumseh: THG1352YGS
5. Huayi: HYE69MTU

5 Replacements (Other Gas – R600a):

Note: Requires full system flush and oil change consideration.

1. ZMC: EGM66AA
2. Embraco: EMX55CLC
3. Secop: TLES6.5KK.3
4. Donper: L72CZ1
5. Jiaxipera: T1114Y

The Engineering Guide to ZMC EGM66AF Performance

In the demanding world of residential cooling, the compressor serves as the mechanical heart of the appliance. The ZMC EGM66AF stands out as a robust 1/6 HP unit, specifically engineered for Low Back Pressure (LBP) applications. This model is a favorite among field engineers due to its Egyptian-made reliability, combining European design standards with local durability.

Technical Efficiency & Motor Design

The EGM66AF utilizes an RSIR motor (Resistive Start, Induction Run). Unlike many modern low-power compressors that use aluminum windings to shave weight, ZMC continues to utilize high-purity copper. This ensures better heat dissipation and reduces the risk of winding burnout during high-ambient-temperature summers.

Comparative Value Analysis

When compared to its peers, the EGM66AF offers a balanced displacement-to-power ratio:

Professional Field Advice & Benefits

• Optimal Environment: This compressor is designed for static cooling. Do not install it in commercial cabinets that require forced-air fan cooling unless the airflow is specifically directed at the compressor body to prevent overheating.
• Vacuum Protocol: R134a systems use POE oil, which is highly sensitive to moisture. A minimum vacuum of 500 microns is essential to prevent “acid” formation inside the capillary tube.
• Filter Drier: Always replace the filter drier when installing a new EGM66AF. A 15g or 20g drier is sufficient for a 10-foot refrigerator setup.

SEO Metadata

• Focus Keyphrase: ZMC EGM66AF Refrigerator Compressor 1/6 HP
• SEO Title: Mbsmpro.com | ZMC EGM66AF Compressor Specs | 1/6 HP R134a Technical Data
• Meta Description: Detailed technical specifications for the ZMC EGM66AF compressor. Ideal for 10-12 feet refrigerators using R134a. Find HP, cooling capacity, and 10 cross-replacement models.
• Slug: zmc-egm66af-1-6-hp-compressor-specs
• Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, ZMC, EGM66AF, R134a, 1/6 HP, Refrigerator Repair, Compressor Replacement, Danfoss TLS6F, Embraco EMY65HLC, Panasonic QB66C, Cooling Technology.

Excerpt

The ZMC EGM66AF is a high-reliability 1/6 HP compressor designed for Low Back Pressure (LBP) applications in domestic refrigerators ranging from 10 to 12 feet. Utilizing R134a refrigerant and a 6.66cc displacement, this unit features durable copper windings and an RSIR motor, making it a preferred choice for technicians seeking longevity and efficiency.