Jiaxipera JM1080Y Compressor 1/8 hp R600a, capillary 0.028 2.5m

Mbsmpro.com, Compressor, JM1080Y, 1/8 hp, Jiaxipera, Cooling, R600a, 100 W, 0.6 A, 1Ph 220–240V 50Hz, LBP, RSCR, -35°C to -10°C, cooling or freezing

Jiaxipera JM1080Y Technical Specifications

This compressor is a high-efficiency model designed for R600a refrigerant and Low Back Pressure (LBP) applications.

Compressor Performance Data

  • Horsepower (HP): Rated at approximately 1/8 HP (or 1/8+ HP).
  • Cooling Capacity: Reaches up to 100 Watts (approximately 341 BTU/h) according to ASHRAE standards.
  • Displacement: 6.0 $cm^3$.
  • Refrigerant Type: R600a (Isobutane).

Recommended Capillary Tube Sizes

To achieve the best performance in domestic refrigeration units, use the following specifications:

  • Primary Option: 0.031 inch (0.8 mm) diameter with a length of 3 meters.
  • Secondary Option: 0.028 inch (0.7 mm) diameter with a length of 2.5 meters.

Technical Installation Notes

  • Precision Charging: Because R600a is used, the system must be charged strictly by weight (in grams) as indicated on the appliance’s data plate.
  • Sensitivity: This refrigerant is highly sensitive to even minor deviations in gas volume.
  • Vacuum Process: A thorough vacuum (20–30 minutes) is mandatory to ensure the system is completely free of air and moisture before charging.

The refrigeration industry relies on precision components to maintain efficiency and food safety. Among these, the Jiaxipera JM1080Y stands out as a high-performance, hermetic reciprocating compressor engineered for modern domestic appliances. Designed for low-back-pressure (LBP) applications, this unit is commonly found in energy-efficient refrigerators and freezers where quiet operation and low energy consumption are paramount.

Operating on R600a (Isobutane), the JM1080Y reflects the global shift toward environmentally friendly refrigerants with low global warming potential. Its design incorporates a robust motor and optimized internal mechanics to ensure longevity and consistent cooling capacity even under varying thermal loads.


Technical Specifications: Jiaxipera JM1080Y

Feature Specification
Model JM1080Y
Utilisation (mbp/hbp/lbp) LBP (Low Back Pressure)
Domaine (Freezing/Cooling) Freezing and Cooling
Cooling wattage at -23.3°C 100 W
Cubic feet (approx. cooling capacity) 6.5 to 8.5 cu. ft.
Litres (approx. cooling capacity) 185 to 240 Liters
Kcal/h 86 Kcal/h
Oil Type and Quantity Mineral Oil / 180 ml
Horsepower (HP) 1/8 hp
Refrigerant Type R600a
Power Supply 220–240V / 50Hz
Cooling Capacity BTU/h 341 BTU/h
Motor Type RSCR (Resistance Start – Capacitor Run)
Displacement 6.2 cm³
Winding Material Copper
Pression Charge Low Pressure
Capillary (Suggested) 0.026″ – 0.031″
Refrigerator Models Bosch, Haier, Samsung, Beko, Hisense
Temperature Function -35°C to -10°C
With fan or no Static (Natural cooling)
Commercial or no No (Domestic / Household)
Amperage in function 0.55 A – 0.6 A
LRA (Locked Rotor Amps) 4.6 A
Type of relay PTC Starter
Capacitor Value 2.5 µF / 450V
Country of Origin China

Efficiency Metrics (COP) & Performance Data

The coefficient of performance (COP) is a critical indicator of how much cooling work the compressor does relative to the electrical energy it consumes.

Evaporating Temp (°C) Cooling Capacity (Watts) Power Consumption (Watts) COP (W/W)
-35 58 51 1.14
-30 76 60 1.27
-23.3 (Standard) 100 68 1.47
-20 118 74 1.59
-15 146 82 1.78
-10 180 92 1.96

Comparison: JM1080Y vs. Industry Standard 1/10 HP Units

While many 1080 models are rated at 1/10 HP, the JM1080Y is frequently categorized as a 1/8 HP unit due to its higher displacement (6.2 cm³) compared to the standard 5.5 cm³ found in models like the NE1080Y. This extra displacement provides a higher cooling reserve, making it more resilient in high-ambient temperature conditions.


Replacement Cross-Reference

5 Replacements (Same Gas: R600a)

  • Embraco: EMX32CLC
  • Secop (Danfoss): TLES5.7KK.3
  • Huayi: HYE55Y
  • Donper: A90CY
  • LG: CMA057LBJH

5 Replacements (Other Gas: R134a)

Note: Converting systems between refrigerants requires a total oil flush and system cleaning.

  • Jiaxipera: ND1080Y
  • Embraco: EMT32HLP
  • Secop: TLS5F
  • Cubigel: GL45AA
  • Tecumseh: THG1335YS

Expert Engineering Advice & Notice

  1. Refrigerant Safety: R600a is highly flammable. Always ensure there are no ignition sources in the work area and use a vacuum pump specifically rated for hydrocarbons.
  2. Vacuum & Moisture: A deep vacuum of 500 microns or less is mandatory. Mineral oil in R600a systems is sensitive to moisture, which can cause internal acid formation.
  3. Capillary Selection: If replacing a compressor with a different brand, always verify the capillary tube size. A mismatch can lead to liquid slugging or poor evaporator utilization.
  4. Static Cooling: This compressor is designed for static cooling. Do not enclose it in a tight space without adequate airflow, as overheating will drastically reduce the lifespan of the motor windings.

Focus Keyphrase: Jiaxipera JM1080Y Compressor 1/8 hp R600a

SEO Title: Mbsmpro.com, Jiaxipera JM1080Y, 1/8 HP, R600a Refrigerator Compressor

Meta Description: Detailed technical data for the Jiaxipera JM1080Y compressor. 1/8 HP, 100W cooling capacity, R600a refrigerant. Includes wiring, COP tables, and compatible replacements for LBP applications.

Slug: jiaxipera-jm1080y-compressor-1-8-hp-r600a-specs

Add Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Jiaxipera, JM1080Y, R600a Compressor, 1/8 HP Compressor, Refrigerator Repair, EMX32CLC replacement, TLES5.7KK.3, HYE55Y, LBP Compressor, Cooling Capacity 100W.

Excerpt: The Jiaxipera JM1080Y is a high-performance 1/8 hp compressor specifically designed for R600a refrigerant in domestic LBP applications. With a cooling capacity of 100W and a displacement of 6.2 cm³, it provides a quiet, energy-efficient solution for modern refrigerators. This guide covers technical data, performance metrics, and professional field advice for technicians.

Jiaxipera JM1080y, 1/6 hp+, 143w, r600a, capillary 0.028 inch diameter with a length of 2.5 meters mbsmpro



ZMC GL45AN Compressor – R134a, 1/8 HP, LBP

Mbsmpro.com | ZMC GL45AN Compressor – R134a, 1/8 HP, LBP Cooling & Freezing Applications

Professional Overview

The ZMC GL45AN is a hermetic refrigeration compressor designed for domestic and light commercial refrigeration systems operating with R134a refrigerant. This model belongs to the LBP (Low Back Pressure) category and is widely used in refrigerators, beverage coolers, small freezers, and under-counter cooling equipment.

Engineered for reliability, low noise, and stable thermal performance, the GL45AN is well adapted for continuous duty cycles in temperature ranges typically found in cooling and light freezing systems. Its compact displacement and efficient motor design make it a common replacement compressor in service and maintenance operations.


Technical Identity & Operating Principle

The GL45AN operates using a single-phase RSIR motor system, optimized for energy efficiency and smooth start-up. It is oil-lubricated with mineral oil compatible with R134a, ensuring proper lubrication and long service life.

This compressor is designed to work without an external cooling fan, relying instead on natural air convection around the shell, which simplifies installation and reduces failure points.


Complete Technical Specification Table

Parameter Value
Model ZMC GL45AN
Utilisation (MBP/HBP/LBP) LBP
Domaine (Freezing / Cooling) Cooling & Light Freezing
Oil Type & Quantity Mineral Oil – approx. 180 ml
Horsepower (HP) 1/8 HP
Refrigerant Type R134a
Power Supply 220–240V / 50Hz / 1 Phase
Cooling Capacity (BTU/h) ~450–520 BTU/h
Motor Type Single-Phase Induction (RSIR)
Displacement ~4.5 cm³
Winding Material Copper
Pressure Charge Factory nitrogen holding charge
Capillary Tube 0.031″ – 0.036″ (system dependent)
Compatible Refrigerator Models Single-door fridge, minibar, beverage cooler
Temperature Function −30°C to −10°C evaporating
With Fan or No No fan
Commercial Use Yes (light commercial)
Amperage (Running) 1.1 – 1.4 A
LRA (Locked Rotor Amps) ~6.5 A
Relay Type PTC Relay
Capacitor Not required (RSIR design)

Electrical Configuration (RSIR System)

The GL45AN uses a Resistance Start Induction Run configuration:

  • Start winding activated via PTC relay
  • No run capacitor required
  • Thermal overload protection integrated
  • Designed for stable voltage environments

This configuration reduces component count and improves long-term reliability.


Application Examples

This compressor is suitable for:

  • Domestic refrigerators (single door)
  • Hotel minibars
  • Beverage display coolers
  • Small medical refrigerators
  • Undercounter cooling units

It is not recommended for:

  • Deep freezing below −35°C
  • High back pressure systems
  • Large commercial freezer cabinets

Performance Comparison (Same Class)

Model Refrigerant HP Displacement
ZMC GL45AN R134a 1/8 4.5 cc
Secop TLES5.7 R134a 1/6 5.7 cc
Embraco EM2X60 R134a 1/6 6.0 cc
Huayi HYE45 R134a 1/8 4.5 cc

The GL45AN offers lower energy consumption compared to higher-displacement compressors, making it ideal where efficiency and compact size are required.


Replacement Compressors – Same Refrigerant (R134a)

  1. Embraco EM2X45
  2. Secop TLES4.8
  3. Huayi HYE45
  4. Donper GFF45AA
  5. LG MA45LAEG

Replacement Compressors – Other Refrigerants (With System Modification)

  1. Embraco EGX70 (R600a)
  2. Secop TLY5.7 (R600a)
  3. Huayi HYB45 (R600a)
  4. Donper GHF50 (R600a)
  5. LG MA53LAG (R600a)

System oil, capillary, and dryer must be adapted.


Engineering Advice & Best Practices

  • Always replace the filter dryer when installing
  • Evacuate system to below 500 microns
  • Maintain condenser airflow clearance
  • Match capillary length precisely
  • Avoid overcharging; R134a is sensitive to charge quantity

Key Benefits

  • Low vibration & quiet operation
  • Proven durability in field use
  • Easy replacement compatibility
  • Stable cooling under voltage fluctuation
  • Widely available service parts

Frequently Asked Question

Can the ZMC GL45AN be used in a freezer?

Yes, it can operate in light freezing applications down to approximately −30°C evaporating temperature, provided the system is correctly sized and ventilated.


Focus Keyphrase

ZMC GL45AN compressor R134a 1/8 HP LBP refrigeration compressor for refrigerator cooling and light freezing applications replacement guide


SEO Title

ZMC GL45AN Compressor R134a 1/8 HP | Technical Specs & Replacement Guide


Meta Description

Professional guide to the ZMC GL45AN compressor: R134a, 1/8 HP, LBP refrigeration use, specifications, replacements, applications, and expert installation advice.


SEO Slug

zmc-gl45an-compressor-r134a-1-8hp


Tags

ZMC GL45AN, Compressor R134a, 1/8 HP Compressor, Refrigerator Compressor, Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, GL45AN replacement, Embraco replacement, Secop replacement


Excerpt

The ZMC GL45AN is a hermetic refrigeration compressor designed for R134a systems in cooling and light freezing applications. With a 1/8 HP motor, LBP operation, and RSIR electrical design, it delivers stable performance, low noise, and high reliability for domestic and light commercial refrigeration equipment.

ZMC GL45AN Compressor – R134a, 1/8 HP, LBP mbsmpro