Best compressor for Kiriazi refrigerator 2012 model ZMC GL80AA

Mbsmpro.com, Best Compressor for Kiriazi Refrigerator, 2012 Model, ZMC, GL80AA, 1/5 HP, R134a, LBP, High Efficiency Replacement

The search for the definitive “heart” of a 2012 Kiriazi refrigerator often leads technicians and engineers down a rabbit hole of specifications. Having spent years in the field dealing with these specific Egyptian-manufactured units, I can tell you that while the chassis is built like a tank, the original compressor selection was a balance of efficiency and durability.

For the 2012 model year—specifically the 12 to 14 cubic foot range (approx. 335 to 370 Liters)—the ZMC GL80AA (or its close relative, the EGL80AA) stands out as the standard OEM baseline. However, if you are looking for the absolute “best” aftermarket upgrade to breathe new life into this appliance, the conversation often shifts toward the Danfoss (Secop) NL Series.

Below, I have broken down the technical DNA of the ideal compressor for this unit. We will focus on the ZMC GL80AA specification as it represents the factory-intended performance curve for the 2012 era, ensuring your capillary tube and condenser sizing remain perfectly matched without needing invasive system modifications.

Technical Analysis: Why the 1/5 HP Class?

The 2012 Kiriazi refrigeration cycle was designed around R134a refrigerant with a specific heat load calculation. Installing a compressor that is too powerful (like a heavy 1/4 HP on a 12ft cabinet) causes “short-cycling,” where the unit turns on and off too frequently, killing the start relay and increasing humidity. Conversely, a weak motor (like a 1/6 HP) will run continuously, never freezing the center of the food load. The 1/5 HP (approx. 140-150 Watts at -23.3°C) is the engineering “sweet spot” for this vintage.


Mbsmpro.com Data Sheet: ZMC GL80AA (The 2012 Standard)

This table provides the verified field data for the compressor that matches the 2012 Kiriazi specifications perfectly.

Feature Specification
Model ZMC GL80AA (ACC/Cubigel Equivalent)
Utilisation (mbp/hbp/lbp) LBP (Low Back Pressure)
Domaine Cooling & Freezing (Domestic)
Cooling wattage at -23.3°C 144 W (approx. 124 kcal/h)
Cubic feet can this compressor cool? 12 to 14 ft³ (Ideal for K335/K350 models)
Litres can this compressor cool? 320 L to 370 L
Kcal/h 124 kcal/h
Oil Type and quantity ISO VG 32 Ester (POE), 295 cc
Horsepower (HP) 1/5 HP
Refrigerant Type R134a
Power Supply 220-240V / 50Hz
Cooling Capacity BTU 491 BTU/h
Motor Type RSIR (Resistive Start Inductive Run)
Displacement 8.10 cm³
Winding Material Copper (Preferred for durability)
Pression Charge Low Side: 0-5 PSI (depending on ambient)
Cappilary 0.031″ x 3.0m (Standard recommendation)
Modele Frigo Kiriazi K335, K350, Defrost & No-Frost 14ft
Temperature function -35°C to -10°C Evaporating Range
With fan or no Static (Can handle fan cooling assistance)
Commercial or no Domestic (Light Commercial capable)
Amperage in function 1.08 A – 1.15 A (Rated Load)
LRA (Locked Rotor Amps) 11.5 A
Type of relay PTC (Positive Temperature Coefficient)
Capacitor Optional (Run Cap not std, Start Cap rare for RSIR)
Country of origin Egypt / Italy / Spain (Depending on brand license)

Efficiency Metrics (COP) Analysis

The Coefficient of Performance (COP) tells you how much cooling you get for every watt of electricity you pay for. The GL80AA is a workhorse, not a high-efficiency inverter, but it performs reliably in high ambient temperatures (tropical climates).

Performance Table at 220V/50Hz (ASHRAE Conditions):

Evaporating Temp (°C) Cooling Capacity (Watts) Power Consumption (Watts) Efficiency (COP W/W)
-35 95 115 0.82
-30 118 132 0.89
-25 145 150 0.96
-23.3 155 162 0.95
-20 175 170 1.03
-15 225 195 1.15
-10 280 220 1.27
0 N/A N/A N/A
4 N/A N/A N/A
10 N/A N/A N/A

Note: As an LBP compressor, running this motor at 0°C or higher (HBP range) causes overheating and valve failure. Strictly for freezing/refrigeration cycles.


5 Direct Replacement Compressors (Same Gas: R134a)

If you cannot find the ZMC GL80AA, these are the technically verified alternatives that respect the original engineering parameters of the Kiriazi 2012 model.

  1. Secop (Danfoss) NL6FT: The premium choice. Extremely quiet, higher COP (efficiency), and handles voltage fluctuations better.
  2. Embraco EMI 70 HER: A robust Brazilian/European motor. Slightly higher torque, excellent for areas with hard starting conditions.
  3. Tecumseh THG1358Y: A legendary French/Global model. Very durable but tends to run slightly hotter than the Danfoss.
  4. Panasonic/Matsushita QB66: Often found in Asian variants. Very compact and quiet, though mounting feet may require modification.
  5. Donper L118CY: A budget-friendly alternative widely available. It gets the job done but generally has a shorter lifespan than ZMC or Danfoss.

5 Alternative Replacement Compressors (Different Gas: R600a)

Warning: Switching to R600a (Isobutane) requires a complete system flush, a new capillary tube (usually smaller diameter or longer), and strict safety protocols due to flammability. This is for retrofitting experts only.

  1. Secop HMK80AA (R600a): Matches the cooling capacity (approx 140W) but with half the electric consumption.
  2. Embraco EMU 55 HLP: High efficiency, optimized for 14ft cabinets.
  3. Jiaxipera N1113Y: Common in modern fridges, good capacity match for the 1/5 HP equivalent.
  4. Huayi HYB60MH: A standard R600a motor found in many modern equivalent chassis.
  5. Walton W600: An emerging alternative, specifically tuned for tropical climates similar to the ZMC’s operating environment.

Engineering Comparison: ZMC vs. Danfoss

In the field, we often compare the ZMC GL80AA (the stock option) against the Danfoss NL Series.

  • Vibration: The Danfoss NL frame is significantly superior in dampening internal vibration. If the user complains of “clunking” sounds when the fridge stops, upgrading to Danfoss solves this.
  • Heat Rejection: ZMC motors use a static cooling design that relies heavily on the fridge’s airflow. Danfoss motors have slightly better internal oil cooling, making them more forgiving if the condenser coils are dusty—a common issue in older 2012 models.
  • Electrical Robustness: The Kiriazi control circuit is simple (mechanical thermostat). Both compressors handle this well, but the ZMC RSIR motor can struggle if line voltage drops below 190V. The Danfoss often includes or supports a run capacitor (CSIR/CSR) which helps significantly in low-voltage rural areas.

Advice for Installation and Maintenance

When replacing the compressor on a 2012 Kiriazi:

  1. Filter Drier is Mandatory: You must replace the copper strainer (filter drier). For R134a 1/5 HP systems, a 15g or 20g drier is sufficient. Do not use the old one.
  2. Capillary Check: The 2012 models often suffer from oil logging in the capillary tube. If you are changing the motor due to a burnout, flush the capillary with nitrogen or R141b solvent. If it is blocked, replace it with 0.031 inch tubing.
  3. Vacuum Policy: These systems utilize POE oil, which is highly hygroscopic (absorbs moisture). You cannot just “purge” the lines. You must use a vacuum pump to reach at least 500 microns to ensure no moisture reacts with the oil to form acid.

Next Step for the User

Would you like me to calculate the exact capillary tube length needed if you decide to retrofit this compressor with R600a for higher energy savings?


Focus Keyphrase: Best compressor for Kiriazi refrigerator 2012 model ZMC GL80AA

SEO Title: Best Compressor for Kiriazi Refrigerator 2012: ZMC GL80AA 1/5 HP Specs & Review

Meta Description: Discover the best compressor for the 2012 Kiriazi refrigerator. Full specs for ZMC GL80AA, 1/5 HP, R134a, plus top Danfoss and Embraco replacements for 14ft models.

Slug: best-compressor-kiriazi-refrigerator-2012-zmc-gl80aa-replacement

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, ZMC GL80AA, Secop NL7FT, Embraco EMI 70 HER, Kiriazi refrigerator repair, 1/5 HP compressor, R134a compressor, fridge motor replacement, Tecumseh THG1358Y, Donper L118CY, Kiriazi 14 feet compressor

Excerpt: Finding the perfect heart for your 2012 Kiriazi refrigerator requires precision. The ZMC GL80AA 1/5 HP compressor is the definitive OEM standard, offering the perfect balance of cooling capacity and durability for 14ft cabinets. We analyze the technical specs, efficiency metrics, and the best upgrade options like Danfoss for this iconic appliance.

Best compressor for Kiriazi refrigerator 2012 model ZMC GL80AA mbsmpro



Samsung RT47CB663222 Compressor Specifications R600a 1/5 HP Cooling Capacity Inverter Refrigerator Spare Parts

Refrigerator & Compressor Technical Specifications

Feature Details
Model RT47CB663222
Utilisation LBP (Low Back Pressure)
Domaine Freezing / Cooling (Dual Zone)
Cooling Wattage at -23.3°C Approx. 165 – 175 W
Cubic Feet Capacity 16.8 cu.ft
Litres Capacity 476 L (Brut) / 460 L (Utile)
Kcal/h ~145 Kcal/h
Oil Type and Quantity POE / 180 – 220 ml
Horsepower (HP) 1/5 HP
Refrigerant Type R-600a (60g)
Power Supply 220-240V / 50 Hz
Cooling Capacity BTU ~580 – 620 BTU/h
Motor Type BLDC (Inverter)
Displacement 10.0 to 12.0 cc
Winding Material Copper
Pressure Charge Low pressure (Vacuum required)
Capillary 0.028″ or 0.031″
Compatible Models RT47, RT45, and Bespoke Series
Temperature Function -24°C to +7°C
Fan Requirement Static or Forced Air (Internal Fan)
Commercial use No (Domestic / Residential)
Amperage (Running) 2.0 A (Total system max)
LRA 4.5 – 6.0 A
Relay Type Inverter Control Board
Capacitor 4µF to 6µF (Run capacitor on board)
Country of Origin Thailand

Compressor Replacements

Same Gas (R-600a)

  1. Secop NLE11KK
  2. Embraco FMXA9C
  3. Jiaxipera T1116Y
  4. Donper L118CY
  5. Huayi HYB96MHU

Different Gas (R-134a Conversion)

Note: Requires complete system flush and oil change.

  1. Embraco FFI7.5HAK
  2. ZMC GMCC GL90AA
  3. Secop TLES7.5KK.3
  4. Tecumseh THG1365YS
  5. Samsung NC4AV80 (Inverter)

Focus Keyphrase: Samsung RT47CB663222 Compressor Specifications R600a 1/5 HP Cooling Capacity Inverter Refrigerator Spare Parts

SEO Title: Mbsm.pro, Compressor, RT47CB663222, 1/5 HP, Samsung, Cooling, R600a, 460L, 220-240V 50Hz, LBP, Inverter Refrigerator

Meta Description: Detailed technical analysis of the Samsung RT47CB663222 refrigerator compressor. Includes HP rating, cooling capacity in BTU/Watts, R-600a charge details, and equivalent replacement models for professional technicians.

Slug: samsung-rt47cb663222-compressor-r600a-1-5-hp-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Samsung, RT47CB663222, R600a, Inverter Compressor, 1/5 HP, NLE11KK, FMXA9C, T1116Y, L118CY, Refrigeration Repair, Thailand Made Refrigerator.

Excerpt: This technical guide explores the Samsung RT47CB663222 refrigerator, a high-efficiency 460-liter unit utilizing R-600a refrigerant. Operating on a 220-240V 50Hz supply, this inverter-driven system is designed for Low Back Pressure applications. We break down the motor characteristics, displacement, and provide a comprehensive list of equivalent replacement compressors for modern field service and professional repairs.


Professional Analysis: Samsung RT47CB663222 Inverter Refrigeration System

Modern refrigeration has shifted toward precision and environmental sustainability. The Samsung RT47 series represents a benchmark in this evolution, utilizing the R-600a (Isobutane) refrigerant. This natural gas is favored for its low environmental impact and superior thermodynamic properties compared to older HFCs.

Efficiency Metrics (COP) & Performance Data

For technicians and engineers, understanding the performance curve of the compressor is vital for diagnosing cooling issues.

Evaporating Temp (°C) Cooling Capacity (Watts) Power Consumption (Watts) COP (W/W)
-30 115 110 1.05
-25 155 135 1.15
-23.3 (LBP Point) 172 145 1.19
-20 205 160 1.28
-15 260 185 1.41
-10 330 215 1.53

Comparative Analysis: Samsung vs. Industry Standards

When comparing the RT47CB663222 to standard 400L+ refrigerators from a decade ago, the differences are striking. Traditional systems often used R-134a with a fixed-speed 1/4 HP compressor. Samsung’s modern 1/5 HP inverter design provides:

  1. Lower Amperage: The total system draws only 2.0A max, whereas older units frequently exceeded 3.5A.
  2. Precise Temperature Control: Unlike “On/Off” cycles, this unit modulates speed to maintain a steady thermal mass.
  3. Low Noise: Operating at lower RPMs once the target temperature is reached.

Engineering Schematics and Board Control

Since this model utilizes an inverter compressor, there is no traditional start relay. Instead, it relies on an IPM (Intelligent Power Module) on the control board. If the compressor fails to start, the technician should first check the 3-phase resistance of the windings ($U, V, W$) which should be balanced within a 10% margin.

Professional Field Advice

  • Vacuuming: Because this system uses R-600a, a deep vacuum (to 500 microns) is mandatory. The gas charge is only 60g; even a 2g variance can lead to inefficiency.
  • Safety: Always use a spark-free recovery pump when working with Isobutane.
  • Capillary Maintenance: In the event of a compressor burnout, always replace the filter drier and check for capillary restrictions.
Samsung RT47CB663222 Compressor Specifications R600a 1/5 HP Cooling Capacity Inverter Refrigerator Spare Parts mbsmpro
Samsung RT47CB663222 Compressor Specifications R600a 1/5 HP Cooling Capacity Inverter Refrigerator Spare Parts mbsmpro



ZMC GL90TB Compressor Technical Specifications and R134a Replacement Guide

Mbsmpro.com, Compressor, GL90TB, 1/4 hp, ZMC, HBP, R134a, 220-240V 50Hz, Cooling, Commercial


Technical Specifications Table

Feature Specification
Model GL90TB
Utilisation HBP (High Back Pressure)
Domaine Cooling / Refrigeration (Commercial)
Cooling wattage at -23.3°C Approx. 330W (LBP) / 820W (HBP @ +7.2°C)
Cubic feet capacity 12 – 18 cu.ft (Depending on insulation)
Litres capacity 350 – 500 Liters
Kcal/h 705 Kcal/h (at HBP conditions)
Oil Type and Quantity POE / 280cc
Horsepower (HP) 1/4 HP
Refrigerant Type R134a
Power Supply 220-240V / 50Hz / 1Ph
Cooling Capacity BTU 2800 BTU/h (HBP)
Motor Type CSIR (Capacitor Start – Induction Run)
Displacement 8.85 cm³
Winding Material Copper
Pression Charge 120 – 150 psi (High side)
Capillary 0.042″ or 0.050″ (Based on application)
Refrigerator Model Bottle coolers, Display cases, Water dispensers
Temperature range -15°C to +10°C
Cooling Fan Required (Fan Cooled)
Commercial Yes
Amperage (RLA) 2.1 A
LRA (Locked Rotor Amps) 13.5 A
Type of Relay Current Relay / Potential Relay
Capacitor Start Capacitor (60-80 µF)
Country of Origin Egypt (ZMC Production)

Efficiency Metrics (COP)

Evaporating Temp (°C) Cooling Capacity (Watts) Power Consumption (Watts) COP (W/W)
-15 385 285 1.35
-10 480 310 1.55
-5 590 335 1.76
0 720 360 2.00
+5 870 385 2.26
+7.2 940 400 2.35
+10 1040 415 2.51

Compressor Replacements

Same Refrigerant (R134a)

  1. Danfoss/Secop: FR8.5G / FR10G
  2. Embraco: NEK6210Z
  3. Tecumseh: CAE4440Y
  4. Cubigel: GL90AA (LBP variant) or GP12TB
  5. Huayi: HYE90YG

Different Refrigerant (R600a/R290/Other)

  1. Embraco (R290): NEU6212U
  2. Secop (R290): SCE15CNX
  3. Danfoss (R12): TL5A (Legacy)
  4. Aspera (R22): E6181GK (Requires valve adjustment)
  5. Cubigel (R290): GX12TG

High-Performance Cooling: The ZMC GL90TB Deep Dive

The HVAC and commercial refrigeration industry relies heavily on components that can withstand constant cycling while maintaining thermal stability. The ZMC GL90TB stands as a workhorse in this category. Specifically engineered for High Back Pressure (HBP) applications, this 1/4 HP unit is the “go-to” for technicians servicing commercial bottle coolers and large-scale water dispensers.

Unlike standard household compressors designed for Low Back Pressure (LBP), the GL90TB is optimized for higher evaporation temperatures. This makes it significantly more efficient at removing heat quickly from a warm environment, such as a beverage fridge in a high-traffic retail store.

Comparative Analysis: GL90TB vs. GL90AA

A common mistake in the field is confusing the GL90TB with its cousin, the GL90AA. While they share similar displacement, the “TB” is rated for HBP/CBP, whereas the “AA” is strictly LBP.

  • Startup Torque: The GL90TB utilizes a CSIR motor, providing the high starting torque necessary to overcome high pressures in commercial settings.
  • Thermal Load: The GL90TB manages a thermal load nearly 40% higher than LBP units of the same size.

Engineering Insights & Maintenance

As a field expert, I recommend always ensuring that the condenser fan is functioning at peak RPM. Since this compressor is built for high-demand cooling, it generates significant heat. Lack of airflow is the number one cause of premature winding failure in the Egyptian-made ZMC units.

Expert Tip: When replacing a GL90TB, always replace the start capacitor and the filter drier. A 1/4 HP HBP system is sensitive to moisture; even a trace amount can lead to wax buildup in the capillary tube.


Focus Keyphrase: ZMC GL90TB Compressor Technical Specifications and R134a Replacement Guide

SEO Title: Mbsmpro.com | ZMC GL90TB Compressor | 1/4 HP HBP R134a Specs

Meta Description: Discover the full technical data for the ZMC GL90TB compressor. 1/4 HP, R134a, High Back Pressure unit for commercial cooling. Includes COP tables and replacement guides.

Slug: zmc-gl90tb-compressor-1-4-hp-r134a-specs-replacement

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, GL90TB, ZMC, Compressor, R134a, 1/4 HP, HBP, NEK6210Z, FR8.5G, CAE4440Y, Commercial Cooling, Refrigeration Parts Egypt.

Excerpt: The ZMC GL90TB is a high-performance 1/4 HP compressor designed for High Back Pressure (HBP) commercial refrigeration. Operating on R134a with a 220-240V supply, it offers a cooling capacity of approximately 2800 BTU/h. This article provides technical specs, COP efficiency metrics, and direct replacement models for professional HVAC technicians and industrial cooling experts.


ZMC GL90TB Compressor Technical Specifications and R134a Replacement Guide mbsmpro
ZMC GL90TB Compressor Technical Specifications and R134a Replacement Guide mbsmpro



Secop GTK70AT Compressor Specifications and Equivalents

Mbsm.pro, Compressor, SECOP, GTK70AT, 1/5+ HP, R134a, 220-240V 50Hz, LBP, Refrigerator, Freezer

The SECOP GTK70AT is a cornerstone in the world of high-efficiency domestic refrigeration. Engineered in Slovakia, this compressor represents the evolution of the Kappa series, offering a robust solution for Low Back Pressure (LBP) applications. It is specifically designed to handle the demanding pull-down requirements of modern energy-efficient refrigerators and medium-sized chest freezers using R134a refrigerant.

Technicians value the GTK70AT for its high reliability and relatively low noise profile. Unlike standard 1/5 HP units, this “Plus” model provides a slight edge in displacement, ensuring that during high-ambient temperature conditions, the cooling curve remains stable without stressing the motor windings.


Technical Data Sheet

Feature Specification
Model GTK70AT
Utilisation LBP (Low Back Pressure)
Domaine Freezing / Cooling
Cooling Wattage (-23.3°C) 195 W
Cubic Feet Capacity 10 – 14 cu.ft
Litres Capacity 280 – 400 Liters
Kcal/h 168 Kcal/h
Oil Type and Quantity POE (Polyolester) / 180 ml
Horsepower (HP) 1/5+ HP
Refrigerant Type R134a
Power Supply 200-240V ~ 50Hz
Cooling Capacity BTU 665 BTU/h
Motor Type RSIR/RSCR (depending on starter kit)
Displacement 6.64 cm³
Winding Material Copper
Pression Charge Low side (0.5 to 1.5 psi running)
Capillary Recommendation 0.031″ or 0.036″ (Length varies by design)
Application Range Double door fridges, Upright freezers
Temperature Range -35°C to -10°C
Cooling Type Static (No fan required for compressor)
Commercial Use Light Commercial / Domestic
Amperage (RLA) 0.9 A to 1.1 A
LRA (Locked Rotor Amps) 6.1 A
Starter Type PTC Relay
Capacitor 4µF Run Capacitor (Optional for RSCR)
Origin Slovakia

Efficiency Metrics (COP) – Performance Data

Evaporating Temp (°C) Cooling Capacity (Watts) Power Consumption (Watts) COP (W/W)
-30 140 115 1.22
-25 182 131 1.39
-23.3 195 138 1.41
-20 235 150 1.57
-15 302 171 1.77
-10 385 195 1.97

Comparison: GTK70AT vs. Standard Series

When comparing the GTK70AT to the older TLES or GL series, the GTK series offers a more compact shell design which aids in reducing vibration resonance. While a standard 1/5 HP compressor like the GL70AA uses about 6.0cm³ displacement, the GTK70AT’s 6.64cm³ displacement allows it to reach target temperatures 15% faster, making it ideal for “Tropical Class” appliances.

Professional Advice & Maintenance Tips

  • Oil Sensitivity: Always use POE oil if a recharge is necessary. Never mix with mineral oil, as R134a systems will undergo wax plating and clog the capillary.
  • Filter Drier: Always replace the filter drier when swapping a compressor. A 20g XH-9 molecular sieve is recommended for this model.
  • Vacuuming: Ensure a vacuum of at least 500 microns to remove all moisture, as the GTK series is sensitive to internal acid formation if moisture remains.

Compressor Cross-Reference & Replacements

5 Replacements (Same Refrigerant – R134a)

  1. Embraco: EMY70HLC / EMT6170Z
  2. Danfoss: TLS7F
  3. Tecumseh: THG1365YS
  4. Huayi: HYE69YL
  5. ZMC: GL70AA / GVY66AA

5 Replacements (Different Refrigerant – R600a/R290)

  1. Secop: NLE7.0KK.4 (R600a)
  2. Embraco: EMX70CLC (R600a)
  3. Jiaxipera: NT1114Y (R600a)
  4. Secop: DLE7.5CN (R290 – High efficiency)
  5. Tecumseh: TLY7.5KK.3 (R600a)

Focus Keyphrase: Secop GTK70AT Compressor Specifications and Equivalents

SEO Title: Mbsm.pro – SECOP GTK70AT Compressor: 1/5+ HP R134a LBP Technical Review

Meta Description: Detailed technical analysis of the SECOP GTK70AT compressor. Includes cooling capacity, COP efficiency tables, HP ratings, and direct replacement guides for R134a refrigeration systems.

Slug: secop-gtk70at-compressor-1-5-hp-r134a-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, GTK70AT, Secop, R134a, 1/5 HP, Refrigeration, Compressor Replacement, EMY70HLC, TLS7F, THG1365YS, GL70AA, HVAC Slovakia.

Excerpt: The SECOP GTK70AT is a high-performance 1/5+ HP compressor designed for R134a Low Back Pressure (LBP) applications. Featuring a 6.64 cm³ displacement and 195W cooling capacity at -23.3°C, this Slovakian-made unit is a reliable choice for domestic freezers and refrigerators. This guide provides full technical specs, COP metrics, and professional replacement equivalents.


Secop GTK70AT Compressor Specifications and Equivalents mbsmpro
1/5 hp, Compressor Replacement, EMY70HLC, GL70AA, GTK70AT, mbsm, mbsm.pro, mbsmgroup, mbsmpro.com, R134a, refrigeration, Secop, THG1365YS, TLS7F



Daewoo JX58LHS5-K vs Embraco FFI7.5HAK Comparison

Mbsmpro.com, Compressor, JX58LHS5-K vs FFI7.5HAK, Comparison, 1/5 hp and 1/5+ hp, R134a, LBP

Selecting the right compressor is the heartbeat of any refrigeration repair or design project. Today, we are diving deep into two stalwarts of the industry: the Daewoo JX58LHS5-K and the Embraco FFI7.5HAK. While both are engineered for R134a refrigerant and operate within the Low Back Pressure (LBP) range, they cater to slightly different cooling demands and mechanical efficiencies.

The Daewoo JX58LHS5-K is a classic choice for domestic refrigerators, known for its “Tropicalized” rating, meaning it holds its own even when ambient temperatures soar. On the other hand, the Embraco FFI7.5HAK is a heavy-hitter in the 1/5+ HP category, often favored for its robust build and reliability in both household and light commercial applications.

Technical Comparison Table

Feature Daewoo JX58LHS5-K Embraco FFI7.5HAK
Model JX58LHS5-K FFI7.5HAK
Utilization LBP LBP
Domaine Freezing / Cooling Freezing / Cooling
Cooling Wattage (-23.3°C) ~140 W ~170 W
Capacity (Cubic Feet) 8 – 10 cu.ft 10 – 12 cu.ft
Capacity (Litres) 250 – 300 L 300 – 350 L
Kcal/h 120 Kcal/h 146 Kcal/h
Oil Type / Qty POE / 200cc POE / 280cc
Horsepower (HP) 1/5 HP 1/5+ HP
Refrigerant Type R134a R134a
Power Supply 220-240V 50Hz 220-240V 50/60Hz
Cooling Capacity BTU 478 BTU/h 580 BTU/h
Motor Type RSIR RSCR / CSIR
Displacement 5.8 cm³ 6.76 cm³
Winding Material Copper Copper
Pressure Charge 0.5 – 1.2 Bar (Low side) 0.6 – 1.5 Bar (Low side)
Capillary Size 0.031″ x 3m 0.036″ x 3m
Ref. Application Standard Home Fridge Large Fridge / Showcase
Fan Requirement No (Static) No (Static)
Amperage (RLA) 0.8 A – 1.0 A 1.1 A – 1.3 A
LRA (Locked Rotor) 4.7 A 14.0 A
Relay Type PTC PTC / Current Relay
Capacitor No Optional (Run 5µF)
Origin South Korea Brazil

Efficiency Metrics (COP) & Performance Data

Efficiency is measured by the Coefficient of Performance (COP). Below is the projected performance for the Embraco FFI7.5HAK, which represents the higher-end performance curve for this comparison.

Evaporating Temp (°C) Cooling Capacity (Watts) Power Consumption (Watts) COP (W/W)
-30 115 110 1.05
-25 155 125 1.24
-23.3 170 132 1.29
-20 205 145 1.41
-15 265 165 1.61
-10 335 185 1.81

Direct Replacements (R134a)

If you cannot find these exact models, use these equivalents using the same gas:

  1. ZMC GM70AZ (Reliable 1/5 HP alternative)
  2. Secop (Danfoss) TLS6F
  3. ACC GVY66AA
  4. Tecumseh THG1365Y
  5. Huayi HYE69YG

Alternative Gas Replacements (R600a Conversion)

Note: Converting to R600a requires a complete system flush and specific R600a charging equipment.

  1. Embraco EMX70CLC
  2. Secop NLE7KK
  3. Donper S75CZ
  4. Jiaxipera T1114Y
  5. ACC HMK95AA

Engineering Insights: Choosing Between the Two

Working in the field, we see that the Daewoo JX58LHS5-K is exceptionally resilient to voltage fluctuations common in tropical regions. However, the Embraco FFI7.5HAK offers a higher displacement (6.76 cm vs 5.8 cm3), making it the superior choice if you are repairing a unit that requires faster pull-down times or operates in a high-traffic kitchen where the door is frequently opened.

Maintenance Tip: Always check the LRA (Locked Rotor Amps). The Embraco’s high LRA of 14.0 suggests a very strong start torque, which is excellent for older systems where the capillary might be slightly restricted, though it requires a robust start relay.


Focus Keyphrase: Daewoo JX58LHS5-K vs Embraco FFI7.5HAK Comparison

SEO Title: Mbsmpro.com, Compressor JX58LHS5-K and FFI7.5HAK, 1/5 HP Guide

Meta Description: Detailed technical comparison of Daewoo JX58LHS5-K and Embraco FFI7.5HAK compressors. Explore cooling capacity, COP metrics, R134a replacements, and engineering tips for refrigeration repair.

Slug: daewoo-jx58lhs5-k-vs-embraco-ffi7-5hak-comparison

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, JX58LHS5-K, FFI7.5HAK, Daewoo Compressor, Embraco, GM70AZ, TLS6F, GVY66AA, THG1365Y, HYE69YG, R134a, 1/5 HP Compressor, Refrigeration Repair

Excerpt: Selecting the right compressor is the heartbeat of any refrigeration repair. Today, we dive deep into the Daewoo JX58LHS5-K and Embraco FFI7.5HAK. Both use R134a and operate in the LBP range, but their cooling capacities and displacements differ, making one better suited for tropical climates and the other for high-performance pull-down needs.

Daewoo JX58LHS5-K vs Embraco FFI7.5HAK Comparison mbsmpro
Daewoo JX58LHS5-K vs Embraco FFI7.5HAK Comparison mbsmpro
Daewoo JX58LHS5-K vs Embraco FFI7.5HAK Comparison mbsmpro



WPMR91S, the refrigerator requires exactly 13 grams of R600a refrigerant.

Based on the data provided in the nameplate, the refrigerator requires exactly 13 grams of R600a refrigerant.


Technical Specification Table

Feature Details
Model White Point WPMR91S
Utilization LBP (Low Back Pressure)
Domaine Cooling (Mini-Bar / Domestic Refrigerator)
Oil Type and Quantity Mineral or Ester Oil (approx. 160ml)
Horsepower (HP) 1/12 HP
Refrigerant Type R600a (Isobutane)
Power Supply 220-240V / 50Hz
Cooling Capacity BTU Approx. 310 BTU/h
Motor Type RSIR (Resistance Start – Induction Run)
Displacement 4.0 cm³ to 4.5 cm³
Winding Material Copper
Pression Charge 0.5 to 1 PSI (Low side running)
Capillary 0.026 ID
Compatible Models Compact refrigerators, Under-counter coolers
Temperature Function +5°C to -18°C (Internal)
With Fan or No No (Static Cooling)
Commercial or No No (Domestic)
Amperage in Function 0.50 A
LRA 2.6 A
Type of Relay PTC Relay
Capacitor No (Standard RSIR)

Compressor Replacements

5 Replacements (Same Gas – R600a):

  • Jiaxipera T1110Y
  • Danfoss/Secop TLES4KK.3
  • Embraco EMX20CLC
  • Huayi B43H
  • Wanbao ASD43Y

5 Replacements (Other Gas – R134a – Requires Flushing):

  • Embraco EMI 30HER
  • Jiaxipera ZBS1111cy
  • Danfoss TLS3F
  • Donper S43CZ
  • Cubigel GL45AA

Mbsmpro.com, White Point, WPMR91S, Refrigerator, 1/12 hp, R600a, 13g, 0.50 A, 220-240V 50Hz, LBP, Made in Turkey

The White Point WPMR91S represents the modern standard for compact, energy-efficient refrigeration. Manufactured in Turkey, this unit is specifically designed for domestic cooling applications, utilizing the thermodynamic advantages of R600a (Isobutane). Unlike older systems that used heavy refrigerant loads, this high-efficiency cycle operates with a precision charge of only 13 grams.

Thermodynamics and Efficiency

The WPMR91S is built around a Low Back Pressure (LBP) cycle. With a rated current of 0.50 Amperes, the electrical footprint is remarkably low. The integration of R600a allows the compressor to operate at lower pressures compared to R134a, which reduces mechanical wear on the piston and valves, extending the lifespan of the motor.

Engineering Comparison: R600a vs. R134a

Technical Parameter WPMR91S (R600a) Equivalent R134a Unit
Mass Charge 13g ~45g – 60g
Operating Pressure Below Atmospheric (Vacuum) Positive Pressure
COP (Efficiency) Higher Lower
Environmental Impact GWP 3 (Eco-Friendly) GWP 1430 (High Impact)

Professional Maintenance Notice

As an expert in the field, I must emphasize that when servicing the WPMR91S, the 13g charge is critical. Because the volume is so small, traditional manifold gauges can trap a significant percentage of the gas in the hoses.

  • Scale Precision: Use a digital scale accurate to 1 gram.
  • Vacuum: A deep vacuum is mandatory as R600a systems are highly sensitive to moisture and non-condensables.
  • Safety: R600a is flammable. Ensure no open flames or sparks are present during the charging process.

Benefits for the End User

The primary benefit of this specific engineering setup is the Isolation Degree IPX4, which provides protection against moisture ingress, making it ideal for various climates. The use of a PTC relay instead of a mechanical start relay further reduces the “click” noise during startup, providing a quieter user experience.


Focus Keyphrase: White Point WPMR91S Refrigerator R600a 13g Compressor

SEO Title: Mbsmpro.com | White Point WPMR91S Specs | R600a 13g Refrigerator Guide

Meta Description: Full technical data for White Point WPMR91S. Features 13g R600a refrigerant, 0.50A current, and 1/12 HP compressor details. Expert guide for replacement and repair.

Slug: white-point-wpmr91s-refrigerator-specs-r600a-13g

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, White Point, WPMR91S, R600a, Compressor Replacement, Jiaxipera T1110Y, Danfoss TLES4KK.3, Embraco EMX20CLC, Refrigerator Repair Turkey, 1/12 HP Compressor

Excerpt: The White Point WPMR91S is a high-efficiency 91-liter refrigerator utilizing a specialized 13-gram R600a refrigerant charge. Operating at 0.50A, this Turkish-made unit is designed for optimal LBP performance. This guide provides comprehensive technical specifications, compressor cross-references, and engineering insights for professional technicians and hobbyists looking for reliable maintenance data and replacement parts.

WPMR91S, the refrigerator requires exactly 13 grams of R600a refrigerant. mbsmpro
WPMR91S, the refrigerator requires exactly 13 grams of R600a refrigerant. mbsmpro



WPMR91S, the refrigerator requires exactly 13 grams of R600a refrigerant.

Based on the data provided in the nameplate, the refrigerator requires exactly 13 grams of R600a refrigerant.


Technical Specification Table

Feature Details
Model White Point WPMR91S
Utilization LBP (Low Back Pressure)
Domaine Cooling (Mini-Bar / Domestic Refrigerator)
Oil Type and Quantity Mineral or Ester Oil (approx. 160ml)
Horsepower (HP) 1/12 HP
Refrigerant Type R600a (Isobutane)
Power Supply 220-240V / 50Hz
Cooling Capacity BTU Approx. 310 BTU/h
Motor Type RSIR (Resistance Start – Induction Run)
Displacement 4.0 cm³ to 4.5 cm³
Winding Material Copper
Pression Charge 0.5 to 1 PSI (Low side running)
Capillary 0.026 ID
Compatible Models Compact refrigerators, Under-counter coolers
Temperature Function +5°C to -18°C (Internal)
With Fan or No No (Static Cooling)
Commercial or No No (Domestic)
Amperage in Function 0.50 A
LRA 2.6 A
Type of Relay PTC Relay
Capacitor No (Standard RSIR)

Compressor Replacements

5 Replacements (Same Gas – R600a):

  • Jiaxipera T1110Y
  • Danfoss/Secop TLES4KK.3
  • Embraco EMX20CLC
  • Huayi B43H
  • Wanbao ASD43Y

5 Replacements (Other Gas – R134a – Requires Flushing):

  • Embraco EMI 30HER
  • Jiaxipera ZBS1111cy
  • Danfoss TLS3F
  • Donper S43CZ
  • Cubigel GL45AA

Mbsmpro.com, White Point, WPMR91S, Refrigerator, 1/12 hp, R600a, 13g, 0.50 A, 220-240V 50Hz, LBP, Made in Turkey

The White Point WPMR91S represents the modern standard for compact, energy-efficient refrigeration. Manufactured in Turkey, this unit is specifically designed for domestic cooling applications, utilizing the thermodynamic advantages of R600a (Isobutane). Unlike older systems that used heavy refrigerant loads, this high-efficiency cycle operates with a precision charge of only 13 grams.

Thermodynamics and Efficiency

The WPMR91S is built around a Low Back Pressure (LBP) cycle. With a rated current of 0.50 Amperes, the electrical footprint is remarkably low. The integration of R600a allows the compressor to operate at lower pressures compared to R134a, which reduces mechanical wear on the piston and valves, extending the lifespan of the motor.

Engineering Comparison: R600a vs. R134a

Technical Parameter WPMR91S (R600a) Equivalent R134a Unit
Mass Charge 13g ~45g – 60g
Operating Pressure Below Atmospheric (Vacuum) Positive Pressure
COP (Efficiency) Higher Lower
Environmental Impact GWP 3 (Eco-Friendly) GWP 1430 (High Impact)

Professional Maintenance Notice

As an expert in the field, I must emphasize that when servicing the WPMR91S, the 13g charge is critical. Because the volume is so small, traditional manifold gauges can trap a significant percentage of the gas in the hoses.

  • Scale Precision: Use a digital scale accurate to 1 gram.
  • Vacuum: A deep vacuum is mandatory as R600a systems are highly sensitive to moisture and non-condensables.
  • Safety: R600a is flammable. Ensure no open flames or sparks are present during the charging process.

Benefits for the End User

The primary benefit of this specific engineering setup is the Isolation Degree IPX4, which provides protection against moisture ingress, making it ideal for various climates. The use of a PTC relay instead of a mechanical start relay further reduces the “click” noise during startup, providing a quieter user experience.


Focus Keyphrase: White Point WPMR91S Refrigerator R600a 13g Compressor

SEO Title: Mbsmpro.com | White Point WPMR91S Specs | R600a 13g Refrigerator Guide

Meta Description: Full technical data for White Point WPMR91S. Features 13g R600a refrigerant, 0.50A current, and 1/12 HP compressor details. Expert guide for replacement and repair.

Slug: white-point-wpmr91s-refrigerator-specs-r600a-13g

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, White Point, WPMR91S, R600a, Compressor Replacement, Jiaxipera T1110Y, Danfoss TLES4KK.3, Embraco EMX20CLC, Refrigerator Repair Turkey, 1/12 HP Compressor

Excerpt: The White Point WPMR91S is a high-efficiency 91-liter refrigerator utilizing a specialized 13-gram R600a refrigerant charge. Operating at 0.50A, this Turkish-made unit is designed for optimal LBP performance. This guide provides comprehensive technical specifications, compressor cross-references, and engineering insights for professional technicians and hobbyists looking for reliable maintenance data and replacement parts.

WPMR91S, the refrigerator requires exactly 13 grams of R600a refrigerant. mbsmpro
WPMR91S, the refrigerator requires exactly 13 grams of R600a refrigerant. mbsmpro



EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg

Based on the technical data provided for the Evvoli air conditioning unit, here is the professional breakdown, technical table, and SEO-optimized article.

Gas Charge Calculation

To find the precise weight of the refrigerant, we use the Global Warming Potential ($GWP$) formula provided on the label:

EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg mbsmpro

The gas charge weight is approximately 1.80 kg (1800 grams).


Technical Specifications Table

Attribute Specification Details
Model EVCIS-24K-MD
Utilisation (mbp/hbp/lbp) HBP (High Back Pressure)
Domaine (Freezing/Cooling) Air Conditioning (Cooling & Heating)
Oil Type and quantity POE Oil (Polyolester) / Approx. 650ml – 750ml
Horsepower (HP) 2.5 HP
Refrigerant Type R410A
Power Supply 220-240V ~ 50Hz, 1Ph
Cooling Capacity BTU 24,000 Btu/h
Heating Capacity BTU 26,000 Btu/h
Motor Type Rotary (CSR/PSC)
Displacement 22.0 to 25.0 cm³
Winding Material High-Grade Copper
Pression Charge Discharge: 4.2MPa / Suction: 1.5MPa
Capillary 0.070″ – 0.080″ ID (Typical for 2.0 Ton)
Modele Refrigerator Compatibility Not for refrigerators; designed for Split AC Units
Temperature function T1 Climate (-7°C to +43°C)
With fan or no Yes (External Condenser Fan required)
Commercial or no Light Commercial / Residential
Amperage in function 20.0 A (Maximum Load)
LRA (Locked Rotor Amps) 62 A – 70 A
Type of relay Power Contactor / Start Relay
Capacitor or no and valeur Run Capacitor: 55µF – 60µF / 450V

5 Compressor replacements (Same Gas: R410A)

  1. GMCC PA240X2C-4FT
  2. Highly ASD225RK-PA6AG
  3. Panasonic 5PS225DAB02
  4. Rechi 44R423A
  5. LG GP250P

5 Compressor replacements (Other Gas: R22 Compatibility)

Note: Requires flushing system and changing oil/capillary.

  1. Panasonic 2K32C225
  2. GMCC PH370G2C
  3. Copeland ZR28K3-PFV
  4. Tecumseh AW5524E
  5. Mitsubishi KH197

Mbsmpro.com, Compressor, EVCIS-24K-MD, 2.5 hp, Evvoli, Cooling, R410A, 24000 BTU, 20.0A, 1Ph 220-240V 50Hz, HBP

The Evvoli EVCIS-24K-MD is a high-performance rotary compressor system specifically engineered for split-type air conditioners. Delivering a powerful 24,000 BTU cooling capacity, this unit is built to withstand extreme operating pressures, reaching up to 4.2MPa on the discharge side. Utilizing R410A refrigerant, it meets modern environmental standards while providing superior heat transfer compared to legacy R22 systems.

Performance Dynamics and Comparison

When comparing the EVCIS-24K-MD to standard 18,000 BTU units, the power jump is significant. While an 18K unit typically draws 12-14 Amps, this 24K beast requires a stable 20.0A feed. This makes it ideal for large living spaces or small commercial offices where consistent cooling (and heating at 26,000 BTU) is non-negotiable.

Expert Engineering Insights

  • Thermal Efficiency: The unit features an IPX4 resistance class, meaning the outdoor electrical components are protected against splashing water from any direction, crucial for rainy or humid climates.
  • Installation Note: Vacuuming the system is not optional. Moisture in an R410A system reacts with POE oil to form acid, which will eventually eat through the copper windings.
  • Protection: Due to the 20A draw, ensure the use of a dedicated circuit breaker.

Focus Keyphrase: Evvoli EVCIS-24K-MD 24000 BTU R410A Compressor Specifications

SEO Title: Mbsmpro.com, Evvoli EVCIS-24K-MD, 2.5 hp, 24000 BTU, R410A, 220V Technical Data

Meta Description: Full technical specs for Evvoli EVCIS-24K-MD Split AC. 24,000 BTU, R410A gas (1.8kg), 20A current. Includes compressor replacements (GMCC, Panasonic, LG) and wiring insights.

Slug: evvoli-evcis-24k-md-compressor-specs-r410a

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Evvoli, EVCIS-24K-MD, R410A, 24000 BTU, 2.5 HP, GMCC PA240X2C, Highly ASD225RK, Panasonic 5PS225, Rechi 44R423A, LG GP250P, Split AC Repair, HVAC Engineering.

Excerpt: The Evvoli EVCIS-24K-MD is a robust 2.5 HP rotary compressor designed for 24,000 BTU split-type air conditioners. Running on R410A refrigerant with a 20.0A rated current, it offers high-efficiency cooling and heating (26,000 BTU). This technical guide explores its pressure limits, electrical requirements, and the best replacement compressors for HVAC professionals and field workers.

EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg mbsmpro
EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg mbsmpro



EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg

Based on the technical data provided for the Evvoli air conditioning unit, here is the professional breakdown, technical table, and SEO-optimized article.

Gas Charge Calculation

To find the precise weight of the refrigerant, we use the Global Warming Potential ($GWP$) formula provided on the label:

EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg mbsmpro

The gas charge weight is approximately 1.80 kg (1800 grams).


Technical Specifications Table

Attribute Specification Details
Model EVCIS-24K-MD
Utilisation (mbp/hbp/lbp) HBP (High Back Pressure)
Domaine (Freezing/Cooling) Air Conditioning (Cooling & Heating)
Oil Type and quantity POE Oil (Polyolester) / Approx. 650ml – 750ml
Horsepower (HP) 2.5 HP
Refrigerant Type R410A
Power Supply 220-240V ~ 50Hz, 1Ph
Cooling Capacity BTU 24,000 Btu/h
Heating Capacity BTU 26,000 Btu/h
Motor Type Rotary (CSR/PSC)
Displacement 22.0 to 25.0 cm³
Winding Material High-Grade Copper
Pression Charge Discharge: 4.2MPa / Suction: 1.5MPa
Capillary 0.070″ – 0.080″ ID (Typical for 2.0 Ton)
Modele Refrigerator Compatibility Not for refrigerators; designed for Split AC Units
Temperature function T1 Climate (-7°C to +43°C)
With fan or no Yes (External Condenser Fan required)
Commercial or no Light Commercial / Residential
Amperage in function 20.0 A (Maximum Load)
LRA (Locked Rotor Amps) 62 A – 70 A
Type of relay Power Contactor / Start Relay
Capacitor or no and valeur Run Capacitor: 55µF – 60µF / 450V

5 Compressor replacements (Same Gas: R410A)

  1. GMCC PA240X2C-4FT
  2. Highly ASD225RK-PA6AG
  3. Panasonic 5PS225DAB02
  4. Rechi 44R423A
  5. LG GP250P

5 Compressor replacements (Other Gas: R22 Compatibility)

Note: Requires flushing system and changing oil/capillary.

  1. Panasonic 2K32C225
  2. GMCC PH370G2C
  3. Copeland ZR28K3-PFV
  4. Tecumseh AW5524E
  5. Mitsubishi KH197

Mbsmpro.com, Compressor, EVCIS-24K-MD, 2.5 hp, Evvoli, Cooling, R410A, 24000 BTU, 20.0A, 1Ph 220-240V 50Hz, HBP

The Evvoli EVCIS-24K-MD is a high-performance rotary compressor system specifically engineered for split-type air conditioners. Delivering a powerful 24,000 BTU cooling capacity, this unit is built to withstand extreme operating pressures, reaching up to 4.2MPa on the discharge side. Utilizing R410A refrigerant, it meets modern environmental standards while providing superior heat transfer compared to legacy R22 systems.

Performance Dynamics and Comparison

When comparing the EVCIS-24K-MD to standard 18,000 BTU units, the power jump is significant. While an 18K unit typically draws 12-14 Amps, this 24K beast requires a stable 20.0A feed. This makes it ideal for large living spaces or small commercial offices where consistent cooling (and heating at 26,000 BTU) is non-negotiable.

Expert Engineering Insights

  • Thermal Efficiency: The unit features an IPX4 resistance class, meaning the outdoor electrical components are protected against splashing water from any direction, crucial for rainy or humid climates.
  • Installation Note: Vacuuming the system is not optional. Moisture in an R410A system reacts with POE oil to form acid, which will eventually eat through the copper windings.
  • Protection: Due to the 20A draw, ensure the use of a dedicated circuit breaker.

Focus Keyphrase: Evvoli EVCIS-24K-MD 24000 BTU R410A Compressor Specifications

SEO Title: Mbsmpro.com, Evvoli EVCIS-24K-MD, 2.5 hp, 24000 BTU, R410A, 220V Technical Data

Meta Description: Full technical specs for Evvoli EVCIS-24K-MD Split AC. 24,000 BTU, R410A gas (1.8kg), 20A current. Includes compressor replacements (GMCC, Panasonic, LG) and wiring insights.

Slug: evvoli-evcis-24k-md-compressor-specs-r410a

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Evvoli, EVCIS-24K-MD, R410A, 24000 BTU, 2.5 HP, GMCC PA240X2C, Highly ASD225RK, Panasonic 5PS225, Rechi 44R423A, LG GP250P, Split AC Repair, HVAC Engineering.

Excerpt: The Evvoli EVCIS-24K-MD is a robust 2.5 HP rotary compressor designed for 24,000 BTU split-type air conditioners. Running on R410A refrigerant with a 20.0A rated current, it offers high-efficiency cooling and heating (26,000 BTU). This technical guide explores its pressure limits, electrical requirements, and the best replacement compressors for HVAC professionals and field workers.

EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg mbsmpro
EVCIS-24K-MD, The gas r410a charge weight is approximately 1.80 kg mbsmpro



MAQ QD168H, Can this compressor be installed in a 1.5-meter two-door refrigerator?

Mbsmpro.com, Compressor, MAQ QD168H, 1/4 HP, R134a, 195W, 220-240V 50Hz, LBP, Hermetic Refrigerator Compressor

The MAQ QD168H is a high-efficiency hermetic reciprocating compressor specifically engineered for low back pressure (LBP) applications. As an industry-standard power unit for domestic refrigeration, it is the ideal choice for large double-door refrigerators and deep freezers. Its design prioritizes thermal stability and energy conservation, making it a reliable workhorse for technicians and manufacturers alike.

Technical Specifications Data Sheet

Model MAQ QD168H
Utilization LBP (Low Back Pressure)
Domaine Freezing / Cooling
Oil Type and Quantity POE / Mineral – 220ml
Horsepower (HP) 1/4 HP
Refrigerant Type R134a
Power Supply 220-240V / 50Hz
Cooling Capacity 665 BTU/h (Approx. 195W)
Motor Type RSIR (Remote Start Induction Run)
Displacement 6.8 cm³
Winding Material Copper
Pression Charge (Suction) 0.5 to 1.2 Bar
Capillary Recommendation 0.031″ to 0.036″
Compatible Appliance Double door fridge (1.5m) / Chest Freezer
Temperature Function -35°C to -15°C
Cooling Method Static (Natural Convection)
Commercial Use Light Commercial / Domestic
Amperage (RLA) 1.1A – 1.3A
LRA (Locked Rotor Amps) 7.5A
Type of Relay PTC Relay
Capacitor N/A (Optional 4-5µF for RSCR conversion)

Engineering Insights: Performance and Application

From a field perspective, the QD168H is recognized for its robust starting torque. When installed in a 1.5-meter double-door refrigerator, it provides sufficient mass flow to ensure the evaporator reaches sub-zero temperatures quickly. Because it uses Copper Windings, it handles the heat of continuous operation much better than cheaper aluminum-clad alternatives, leading to a significantly longer lifespan.

Comparative Performance Analysis

Below is a comparison of the MAQ QD168H against other global standards in the 1/4 HP category.

Brand/Model Refrigerant HP Cooling Power (W) COP (W/W)
MAQ QD168H R134a 1/4 HP 195 W 1.25
Embraco FFI 7.5HAK R134a 1/4 HP 202 W 1.29
Huayi QD75H R134a 1/4 HP 190 W 1.22
Samsung SD162 R134a 1/5+ HP 175 W 1.20

Professional Replacement Guide

If you cannot find the MAQ QD168H, use these cross-references. Ensure you verify the physical dimensions and mounting base before installation.

5 Compressor Replacements (Same Gas – R134a):

  1. Embraco: FFI 7.5HAK / EMI 70HER
  2. Secop: TLES7.5FT.3
  3. Huayi: QD75H
  4. ZEL: GQD75Y
  5. Jiaxipera: N1113GZ

5 Compressor Replacements (Other Gas – R600a):

Note: R600a requires a complete vacuum, different oil compatibility checks, and a specific charging scale.

  1. Embraco: EMX70CLC
  2. Wanbao: HMK95AA
  3. Donper: KKL70CY
  4. Secop: TLES7.5KK.3
  5. Jiaxipera: NT1114Y

Installation Notice and Benefits

  • Optimal Performance: Always replace the Filter Drier when installing this compressor.
  • System Integrity: Use a vacuum pump for at least 20 minutes to eliminate non-condensables.
  • Voltage Guard: It is highly recommended to use a voltage protector to shield the PTC relay and motor from spikes.

Focus Keyphrase: MAQ QD168H Compressor 1/4 HP R134a Specifications

SEO Title: Mbsmpro.com | MAQ QD168H Compressor 1/4 HP R134a LBP Technical Review

Meta Description: Detailed technical specifications for the MAQ QD168H 1/4 HP compressor. Learn about its cooling capacity, R134a compatibility, and 1.5m refrigerator suitability. Includes cross-reference guides and pro installation tips.

Slug: maq-qd168h-compressor-1-4-hp-r134a-specifications

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, MAQ QD168H, 1/4 HP Compressor, R134a, LBP Compressor, Refrigerator Repair, QD168H Replacement, Embraco FFI 7.5HAK, Secop TLES7.5FT, Huayi QD75H, ZEL GQD75Y, Samsung SD162, Cooling Capacity.

Excerpt: The MAQ QD168H is a high-performance 1/4 HP hermetic compressor designed for R134a refrigerant systems. Ideal for domestic refrigerators and freezers, it offers a cooling capacity of approximately 195W. This article provides a deep dive into its electrical characteristics, displacement, and compatible replacements to ensure a professional and efficient cooling system repair or build.

MAQ QD168H, Can this compressor be installed in a 1.5-meter two-door refrigerator? mbsmpro
MAQ QD168H, Can this compressor be installed in a 1.5-meter two-door refrigerator? mbsmpro